-
Posts
173 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Downloads
Blogs
Events
Everything posted by Ahmed Ensar
-
Internet safety - 3.9 alpha 5
Ahmed Ensar replied to PriSonerS61's question in Dev channel issues & test reports
-
Google Translate: When the interface language is set to Turkish, the places in the picture remain blank.
- 1 reply
-
- 1
-
-
-
altdaki backhaul arayüz lite-1 de mac bssid omnidslmac ekledım sonra modem hiç bağlanmadı en azından ayarları kaydetmediğim için reboot edınce eskı ayarlara dondu 🙂 bssid dediğin mac heralde birde bu mac adresi değiştirme komutu değilmi only backhaul client işini nası yapacak 🤔
-
Google Translate: I want keenetic lite-1 device to connect to omni dsl device only. that is, the lite-1 device does not connect to the lite-2 device. Can you bring this feature for clients into mesh system devices?
-
Google Translate: After I installed the last update on the device, dns was broken many times in a few hours. I had to turn dns off and on again every time.
- 1 reply
-
- 2
-
-
Google Translate: The error for "dot" in "NDM-2215" exists in "doh". Can you make the same edit in "doh"? Also, the dot restart response time is too long (150 seconds), it would be nice if you could make this time 10 seconds, otherwise dns will not work for 150 seconds. #588003
-
Adding Notes in the Interface or RMM
Ahmed Ensar replied to KYTECHNGAMING's question in Feature Requests
Aslında buna ek olarak ana yönlendiricideki mesh menüsünden tek tuşla mesh sistemindeki bütün cihazların fw ve ayar dosyalarını indirme gibi bir seçenekte eklenebilir. -
ipv6 name-servers
Ahmed Ensar replied to Ahmed Ensar's question in Dev channel issues & test reports
-
3.08.C.0.0-3 на KN-1211 CPU usage 100%
Ahmed Ensar replied to Vladimir Belov's question in Тестирование Dev-сборок
Google Translate: This is the result of opening ntce on a device with 64mb of memory. Even I have KN-2011 128 mb memory + swap but barely recover the memory cpu is not enough at this time. So I don't recommend qos without a high end device. Therefore, I closed ntce and opened hwnat. -
Google Translate: Can you add an option to change the priorities in the ntce application list? This feature, for example, I'm downloading games from epic, but when downloading, it happens in epic game prioritization and therefore causes delays. It is a very challenging method to enter the game every time and increase the game priority and fix it again when the download is finished. + it would also be nice if you could add an option to add links that are not in this list. 🙂
-
Reset, Wizard: Downgrade forced?
Ahmed Ensar replied to rAcKShen's question in Dev channel issues & test reports
SSH --> more flash:/default-config --> save .txt --> edit page down --> write code --> load startup-config == reset + settings load ? components auto-update channel draft Something like this came to my mind, and I was using this kind of method some times. -
Son güncelleme ile rate limit auto özelliği gelmiş oluşturduğum bir policy ye download ve upload tarafını auto yaparak hız sınırlaması tanımladım ve pc mi ekledim ama bu auto özelliği nasıl çalışıyor pek anlayamadım sadece hızımı dibe vurdu ve kullanılamaz hale getirdi. Bu özellik neye dayanarak hız sınırlaması yapıyor ? ve bu test sonucuna dayanarak auto özelliğinin şuanda bozuk olduğunu söyleyebilirim.
-
IPv6 Speed Limit & Stats
Ahmed Ensar replied to Muhep Atasoy's question in Community Support & Knowledge Exchange
hwnat kapatırsan ipv6 kullanım miktarı görünecektir. -
acme default-domain-certificate-valid
Ahmed Ensar replied to Ahmed Ensar's question in Dev channel issues & test reports
Dediğin gibi yaptım birkaç kez. Biraz önce düzeldimi diye baktım düzelmiş. Teşekkürler. -
acme default-domain-certificate-valid
Ahmed Ensar replied to Ahmed Ensar's question in Dev channel issues & test reports
tamam bi deneyeyim. -
acme default-domain-certificate-valid
Ahmed Ensar replied to Ahmed Ensar's question in Dev channel issues & test reports
birde türkçesini yazsana ikinci cümleden sonrasını çeviriden anlamadım. fw indirip aynı fw yi yeniden yuklememımı ıstıyorsun ? -
acme default-domain-certificate-valid
Ahmed Ensar posted a question in Dev channel issues & test reports
Google Translate: I am using it as omni dsl and lite mesh network. To test something, I removed the lite from the mesh network by ticking two ticks over omni dsl, then after I finished my work, I connected lite wps with omni dsl and included it in the mesh network from the mesh menu. There is no problem in the connection, keen dns is also working, but I click on the rmm and mesh network and select the lite modem interface. The modem cannot be reached through the default domain used to open it. When I look through acme, lite "default-domain-certificate-valid" appears as false, so it cannot create a certificate. I wrote the problem to the support and they said remove it from the mesh and add it again, but I got tired of dealing with this ridiculous problem every time, it had happened a few times before, and it was fixed when I removed it from the mesh and re-added it. Please find a solution to this problem, I'm so tired of it bothering me every time. https://help.keenetic.com/hc/tr/requests/577791 <--self-test -
-
Yanlış biyer yok. sadece senin yazıyı çevirince 2. cümle yanlış çevrilmiş sanırım, kayıtsız cihazlarda görünüyor aynen senin dediğin gibi ben bunu yukardaki arkadaşa söylüyordum. Translate nin azizligine ugradık
-
google çeviri öyle çevirmiş olabilir. yukarda medmax bana cihazı kayıtlı cihazlar listesinden sil demiş bende ona cihaz kayıtsız da olsa ntce listesinde görünüyor diye cevap yazmıştım.
-
Google Translate: appears in the list on unregistered devices.
-
KN-1011 (main mesh) + KN-1611 (mesh) firmware update
Ahmed Ensar replied to Leonid Polyakov's question in Dev channel issues & test reports