Ahmed Ensar

Google Translate: router is in ipv6 slaac mode. I don't want a registered device to get an ipv6 address, how can I do that?

AdGuardHome kuruluydu OPKG ile onu kullanıyordum birkaç gündür yeni güncelleme gelmişdi. Ama modem şişmesin diye fitrelemeyi kapatmıştım sadece loglama açıktı. Evet yukarda yazıyo opkg dns-override açık diye. Heralde bütün DNS altyapısını değiştirince opkg kısmını unutmuşlar zaten önemli bir hata değil düzeltirler.

Google Translate: opkg dns-override is on I guess that's why it says so.

Evet dikkat etmemişim adamı reply yapmışsın.

https://datatracker.ietf.org/doc/html/rfc9000

Kemal konuyu hortlatmış browsera eklenti kurmuyorum malesef. Zaten more den sorguladığım için ekleselerde gerek kalmadı ben yine more dan bakarım.

Google Translate: The release notes link on the dashboard page and the release notes link on the general system settings page are different. /dashboard https://docs.keenetic.com/tr/omni-dsl/kn-2011/tr/6463-latest-main-release.html ------------------------------------------------------- /controlPanel/system https://docs.keenetic.com/tr/omni-dsl/kn-2011/tr/6319-latest-development-release.html

Google Translate: The QUİC protocol Adguard works fine in Windows application. If there is no problem for linux, can you add it to the CLI ?

Google Translate: 80% of the log file consists of these messages, I wrote this problem to keenetic support, they gave such an answer, but they did not take any action to solve the problem, as a result the log file turned into a garbage. --- Google Translate, Support Text: In IPv6, each device can have several IPv6 addresses, so expiration of each is reflected in the log because it causes IPv6 connections to be cleared if the no-register device policy is configured. --> https://help.keenetic.com/hc/tr/requests/563805

File ismini sansürleseydin keşke

Google Translate: my brother doesn't want me to look at his device usage with "ntce". I don't want to see my brother's device in the list, is there such an option? I don't want to delete the module completely.

list devices

Google Translate: I am using omni dsl and lite devices.

Google Translate: When usb swap is plugged in, ntce swap is using too much. When I say remove the swap partition or the driver from the applications menu, the driver cannot be removed due to excessive use, the same applies to the function button safe remove the driver. It would be nice if it does the feature of reducing ntce memory usage while updating, when we say remove the swap device. In addition, it would be better if a setting such as using swap can be added to ntce, because it seems like usb speed cannot reach ntce.

Google Translate: When ntce is on, the cpu is 100%, if it stays like this for a long time, ntce gets into the bug and the internet goes, the only solution is to turn the modem off and on. I hope you solve the ntce cpu usage problem. Video (just a small sample 100% cpu usage)

Google Translate: I think the token login feature is not secure, how can I turn this feature off? keenetic.io/auth?url=%2F&x-ndma-tkn=

Google Translate: Omni DSL (KN-2011) 3.7 Alpha 16 It seems that there is no dsl connection in the port status section, but the connection is available.

Google Translate: The ram usage problem has been solved, but the cpu problem still persists, I expect you to solve this problem with the next update. Also, ntce still doesn't support ipv6, i am suffering from this problem.

Google Translate: mesh network (lite+omni dsl) but an extra lite appears.

+ https://github.com/AdguardTeam/AdGuardHome kara listesi var diye biliyorum.

no

Google Translate: When ntce is on, usb2.0 swap speed is not enough, after a while there is lag. Can you add a feature to turn ntce swap usage on and off. "ntce swap disable" omni dsl

Google Translate: Although I push the capacity, I can play the games very fluently, it works fine, thanks. Omni DSL (KN-2011)