[Ночная тема (расширение браузера)]

16 minutes ago, amosyan said:

I just can’t figure it out, how to assign a description to a wired port?

192.168.1.1/a 

For 1. port;

interface 1 description "ExampleName"

system configuration save

[Reset Button in Mesh Devices]

Hello, 

We have the Keenetic Mesh system. My Mesh has 28 devices. Many Keenetic are in different and special areas. Some are in the common area. 
There may be cases of unconsciously using the reset button on the devices in the private area. 

Therefore, when the repeaters are under the control of a master controller; Wouldn't it be great if when the user performs this action, the system administrator is notified and asked for confirmation?

Can a confirmation mechanism or optional reset button in the repeater be disabled before the reset command? Software blocking...

[Voyager Pro (KN-3510) does not work as extender more than once.]

On 12/28/2023 at 9:37 AM, kiltum said:

Yes, both router and extender connected to managed PoE switch. Actually router and extenders was in one separate vlan. Nobody except them in this vlan

 

I'm not sure if it's related to your question, but I wanted to remind you of something.

Are MSTP / RSTP / STP protocols active on the managed switch?

https://help.keenetic.com/hc/en-us/articles/360016127780-Keenetic-Mesh-Wi-Fi-System-frequently-asked-questions-

 

[Voyager Pro (KN-3510) does not work as extender more than once.]

On 12/24/2023 at 9:51 PM, kiltum said:

yes, i know, it sounds crazy, but it really looks like this

steps to reproduce:

1. Buy 4-pack of voyager pro.

2. take one as main router, configure it, etc. 

3. take another one from the box. turn switch to B, connect to network, see button "accure" in web-interface of main switch.

till this step all ok. 

BAD step - 4. change ip address of main router (this is easiest step to reproduce bug)

oops, all extenders are gone. is looks ok for this step, but ... now you are in stuck. you lost all extenders as extender. now - forever.

what i try: 

- reset extenders by pressing reset button. indicator blinking for some seconds, and return to amber. after some time devices are switches to "dumb access point". Whey are visible in wifi, i can connect to them (by password on back) and get access to network by main router. but i cannot access to dashboard of "damaged switch"

and sure, no any sign in "Mesh Wi-Fi System" page

- turn switch to position A. they are start working as usual router, I can access them, configure, etc. I can even ask "reset to factory state" - all ok, they refreshed, I got initial startup wizard, etc... No extender mode, only router. For extender mode - turn switch 

- return switch to position B - still no luck. no any sign of device. you can reset it again by button or repeat reset to factory from router mode - it does not matter. amber light and all

Now I has 7 "routers" and no extenders

OS 4.0.7

 

Do u use managed POE switch? 

[Linear - Call Forwarding Issue]

Thank you for the detailed information. And I thought the problem was on Avencom side. I'll have it double-checked.

[File Sync App with Cloud,FTP(RClone)]

1- 

2-

http://forums.zyxmon.org/viewtopic.php?f=5&t=5371

 

 

[Linear - Call Forwarding Issue]

On 12/21/2023 at 5:06 PM, sips said:

Hello,

In order to investigate the call forwarding issue, could you, please collect diagnostics on your Keenetic and share it?

Collect the diagnostics by following the steps below:

1. go to GUI>Management>Diagnostics>Debug and click “Restart system in debug mode”;
2. make an incoming call that should be forwarded to your cell phone;
3. go to GUI>Management>Diagnostics>Debug and click “Stop debugging”;
4. download the self-test_*.txt file to your PC and attach it here with your next message.

Hello,

I am sharing the self-test file in the next message for review.

Thank you.

[Linear - Call Forwarding Issue]

Hello,

I created a rule to call my cell phone if there is no answer for 5-10 seconds. The log also shows that he forwarded the call and called.
But I am not receiving calls to the phone I forwarded.

I also contacted my SIP provider. They also checked the required settings.  He was said that there is no obstacle for the forwarding function to not work.

But I didn't get any results.

Can you help me?

@sips

[Skipper 4G KN-2910 WAN Removal Issue]

Opps! The same situation exists in Hero 4G.

 

Quote

TSMB module stopped.
Dec 5 22:44:55 ndm
Core::System::StartupConfig: configuration saved.
Dec 5 22:44:58 ndm
Network::Interface::Ipoe: "GigabitEthernet1" is off-board.
Dec 5 22:44:58 ndm
Core::System::StartupConfig: saving (http/rci).
Dec 5 22:45:02 ndm
Core::System::StartupConfig: configuration saved.
Dec 5 22:45:15 ndhcps
DHCPREQUEST received (STATE_RENEWING) for 192.168.1.54 from 70:c9:32:1a:51:65.
Dec 5 22:45:15 ndhcps
sending ACK of 192.168.1.54 to 70:c9:32:1a:51:65.
Dec 5 22:45:22 ndm
Network::Interface::Ipoe: "GigabitEthernet1" is off-board.
Dec 5 22:45:22 ndm
Core::System::StartupConfig: saving (http/rci).
Dec 5 22:45:26 ndm
Core::System::StartupConfig: configuration saved.
Dec 5 22:45:32 ndm
Network::Interface::Ipoe: "GigabitEthernet1" is off-board.
Dec 5 22:45:32 ndm
Core::System::StartupConfig: saving (http/rci).
Dec 5 22:45:36 ndm
Core::System::StartupConfig: configuration saved.

 

[KN-1011 - 4.0.A.13 - Booting @Fixed Time]

21 hours ago, vst said:

@KYTECHNGAMING According to the results of the lab tests, the problem has been fixed starting from version 4.1.A.18. If the problem reproduces in your environment, please let us know.

Hello,

I have not had any problems since the version I mentioned in my previous message.

But I'm glad to hear that the problem has been fully resolved. You may have seen that the cause of the problem I am experiencing, may be triggering other problems.

If I experience a similar issue again, I will write again.

Thanks.

[2.4Ghz Settings Airtime Fairness Missing]

A friend using iOS and KN-2510 stated that airtime fairness is visible.
Both in the stable application version and beta flight

 

[Skipper 4G KN-2910 WAN Removal Issue]

The ethernet connection (wan) cannot be deleted in the KN-2910 model. 

KeeneticOS 4.0.5

https://gemoo.com/tools/upload-video/share/581278592909447168?codeId=Pa1gAgYp5rXwm&card=581278588975190016

 

Spoiler

[I] Nov  9 18:39:54 ndm: Network::Interface::Base: "GigabitEthernet1": "base" changed "conf" layer state "disabled" to "running". 
[I] Nov  9 18:39:54 ndm: Network::Interface::Base: "GigabitEthernet1": interface is up. 
[I] Nov  9 18:39:54 ndm: Network::Interface::Base: "GigabitEthernet1": interface is up. 
[I] Nov  9 18:39:54 ndm: Core::System::StartupConfig: saving (http/rci). 
[I] Nov  9 18:39:59 ndm: Core::System::StartupConfig: configuration saved. 
[E] Nov  9 18:40:04 ndm: Network::Interface::Ipoe: "GigabitEthernet1" is off-board. 

 

self-test has been added confidentially.

[2.4Ghz Settings Airtime Fairness Missing]

Airtime fairness feature is missing in 2.4ghz settings on some models. 
It is a screenshot from multiple devices.
Beta mobile application is used.

KN-3610, KN-1010- KN-3710- KN-1011 KN-3810 KN-2410 KN-2510

KeeneticOS 4.0.5 or 4.1.a.16 

Keenetic APP 48 (200) Android

 

 

@Alex Sh.

[Rights of Network Managers]

Fixed. 

[Rights of Network Managers]

4 hours ago, Alex Sh. said:

@KYTECHNGAMING Hi, that's definitely a bug. A manager should have an option to remove themselves from the site's manager list. We are investigating this issue atm.

Yes, issue for beta
 

[Rights of Network Managers]

In the network where I am appointed as an administrator;
I can resign myself. I may not want to see the network. There is no way for me to delete the network.
Even though I told the owner of the network to "delete me from here", I hated receiving his messages for 15 days.

I would like the application to have a feature such as allowing the administrator to delete the network or to archive/mute the network in such cases.

If manager assigned; owner delete him/her or remove network of course


If I act like manager, I cannot do something

 

 

[[4.1A.10] - "Routing" page not loading]

Yep. Waiting waiting not loading. 

[[4.1.A.9] - All devices started connecting as wifi5 20mhz instead of wifi5 80mhz]

Just as I predicted.

[[4.1.A.9] - All devices started connecting as wifi5 20mhz instead of wifi5 80mhz]

Same issue for KN-2410. 

Except KN-1011, 80mhz is ok.

 

@eralde I wanted to mention you for this big button problem in the screenshot.

[[4.1.x] About the occasional warning]

 

19 hours ago, Anna Zhelankina said:

@KYTECHNGAMING, I guess I didn't really understand your question! Could you rephrase it or write it in more detail?  

Hello, 

In the part I screenshotted, I occasionally get a "warning that there is an update" is coming out. 
But my whole mesh system is already using the latest KeeneticOS. 

That's why I asked about the situation. 
I wondered if it was indicating a different update for the mesh or a status update in the backhaul. 

My other thought is; I observed this warning a few hours after the arrival of 4.1.a.5 and the next day. Maybe the sign that my Keenetic is up to date in communication with the servers is synchronizing late. I don't know.

[[4.1.x] About the occasional warning]

On 9/5/2023 at 1:07 PM, Anna Zhelankina said:

@KYTECHNGAMING, good day! This text link appears when there are updates to the Wi-Fi system and leads to the Mesh Wi-Fi System page for possible installation.

Hi Anna,

I'm already using the latest version of the update channel.
No software updates are available.

[[4.1.x] About the occasional warning]

Dashboard is open. 
Occasionally this warning appears and disappears on the Mesh-wifi system card. 
Is the warning related to software control or what is it updating in the mesh system?

[[4.1.x] The Menu Is Not Auto-Hide In Some Situations]

When using the hidden left menu, the menu automatically collapses when you navigate to a heading within the menu.
However, when a link is redirected on the page, the left menu remains open. 

Click to download screen record.

Spoiler

https://we.tl/t-ocLjt18it7

 

[[4.1.x] Select nodes for device]

Solved. Thanks 

[[4.1.x] [Request] Reboot All Mesh Button]

16 hours ago, dimon27254 said:

No, entering "mws restart" on the controller restarts the entire MWS, including the controller and members, not just the backhaul.

For example, on my KN-3010 controller, I entered this command, after which the timer for its reboot was set for 10 seconds. Then the same was sent to the members. They released the previously received addresses with a DHCPRELEASE message and then also rebooted.

  Hide contents

 

Thank you. 
Yeah, I checked again yesterday. How the reboot command from RMM works. 

Then it is enough to add a button as @Ahmed Ensar said.