Jump to content

Question

Hello,

Is there a possibility to add some feautres below listed in next versions?

- ICMP/WAN/DSL check by ping count and if fails then reboot device

- Reboot with schedule

- Full URL log with time stamp (Hostname+IP+Mac+URL) to Syslog Server

- Split Full URL log and System log in Live View

- Wi-Fi Site Survey option to see other AP's

- CDP discovery

- Some Keenetics don't update firmware automaticly even if any time is selected. This could also be fixed

Share this post


Link to post
Share on other sites

8 answers to this question

Recommended Posts

  • 0
5 hours ago, atasoyk said:

Hello,

Is there a possibility to add some feautres below listed in next versions?

- ICMP/WAN/DSL check by ping count and if fails then reboot device

- Reboot with schedule

- Full URL log with time stamp (Hostname+IP+Mac+URL) to Syslog Server

- Split Full URL log and System log in Live View

- Wi-Fi Site Survey option to see other AP's

- CDP discovery

- Some Keenetics don't update firmware automaticly even if any time is selected. This could also be fixed

You can execute commands in CLi and make reboot schedule. 

 

Can you read this article about update https://help.keenetic.com/hc/en-us/articles/360000922779

Update works flawlessly.

 

Ping check is available almost in all segments. 

 

You can check Wifi's on your area. Just click WISP and scan both under 2.4 or 5ghz segments. 

  • Upvote 1

Share this post


Link to post
Share on other sites
  • 0

My reboot schedule example

 

yeniden_baslatma_zamanlama:

 

Pazartesi ve Çarşamba 05:58 ' de Yeniden Başlatma

 

schedule rebootroute 

action start 58 5 1,3

action stop 59 5 1,3 

exit 

system reboot schedule rebootroute 

system configuration save 

exit

 

—————————————————————————

 

Hergün 05:58'de Yeniden Başlatma

 

schedule rebootroute 

action start 58 5 *

action stop 59 5 *

exit 

system reboot schedule rebootroute 

system configuration save 

exit

 

—————————————————————————

 

58 5 = Dakika Saat (başlangıç ve bitiş arasında 1 dk fark olmalı)

* = hergün

0 = pazar

1 = pazartesi

2 = salı

3 = çarşamba

4 = perşembe

5 = cuma

6 = cumartesi

 

—————————————————————————

 

Yeniden Başlat Girdilerini Kaldırmak

no system reboot schedule

system configuration save

 

—————————————————————————

 

Tüm komutlar TELNET aracılığı ile yapılmalıdır. 192.168.1.1/a (WebCLI)

 

Ayrıca "sistem ayarları" altında, "otomatik güncelleme" aktif edilip, "güncelleştirmeleri yükleyin" içinde gözüken "rebootroute" girdisini düzenle diyip siliniz.

 

@yerebakan

 

 

 

 

  • Upvote 1

Share this post


Link to post
Share on other sites
  • 0
7 часов назад, atasoyk сказал:

- Wi-Fi Site Survey option to see other AP's

Already implemented long ago.

(config)> show site-survey WifiMaster0 
================================================================================
SSID                               MAC                 Ch   Mode        Q       
================================================================================
ssid                               52:ff:20:yy:xx:zz   4    11b/g/nABOV 100     
💩                                52:ff:20:yy:xx:zz   4    11b/g/nABOV 100     
                                   52:ff:20:yy:xx:zz   4    11b/g/nABOV 100     
Keenetic-7891                      10:7b:ef:yy:xx:zz   12   11g/n       5  

For 5Ghz use WifiMaster1.

  • Thanks 1

Share this post


Link to post
Share on other sites
  • 0
7 часов назад, atasoyk сказал:

- Some Keenetics don't update firmware automaticly even if any time is selected. This could also be fixed

Plz describe what happens. Autoupdate is stochastic, we control probability rate to handle proper load on our servers. It is possible that your device is not so lucky to get update in the first wave.

On the other hand if there is no free space on flash in your router autoupdate cannot be completed also. So plz provide more details about model and set of installed components.

  • Thanks 1

Share this post


Link to post
Share on other sites
  • 0
3 минуты назад, atasoyk сказал:

actually it says there is an update but when i select auto update any time it doesnt start. so i start it manually and it does it without any issues

Yes, autoupdates are scheduled from server. Router will not start autoupdate as soon as it will see files available on channel. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...