Jump to content
  • Announcements

    • Где взять тестовые прошивки   08/23/2016

      Кратко: на files.keenopt.ru Подробнее: CLI мануалы для всех устройств: files.keenopt.ru/cli_manual/. Багфиксовые прошивки из серий 2.06, 2.07, 2.08, 2.09 (они же delta): files.keenopt.ru/firmware/. Повторяют то, что официально выпущено как "Релиз" или "Бета-версия", но выпускаются еженедельно и содержат дополнительные исправления. При их установке вы автоматически будете получать обновления, обозначенные как "Отладочная версия". Экспериментальные прошивки из серии 2.10 (они же draft): files.keenopt.ru/experimental/. Также выпускаются еженедельно, и также автоматически обновляются через меню "Отладочная версия". Экспериментальные прошивки никогда официально не публиковались, впервые тестируются вне компании. Могут содержать как много нового интересного функционала, так и неприятные баги (вплоть до неработоспособности роутера). Будьте осторожны и заранее узнайте, как вернуть на место стабильную версию через режим восстановления. После заливки файла delta или draft, взятого с files.keenopt.ru, появляется выбор "Отладочная версия" на вкладке "Обновления".

        Для различных моделей Keenetic фиксируется версия прошивки, на которой будет заморожена их поддержка Версия 2.04: Keenetic Keenetic Giga Keenetic Lite Keenetic 4G Дальнейшие официальные релизы не запланированы.   Версия 2.05 (журнал изменений): Keeentic DSL Keenetic LTE (активная разработка возобновлена с 09.2016) Keenetic VOX Keenetic III (активная разработка возобновлена с 09.2016) Keenetic Start Keenetic 4G II Официальная поддержка: исправление критических ошибок и проблем в безопасности.   Версия 2.06 (журнал изменений): Keenetic II Keenetic Giga II Keenetic Ultra Официальная поддержка: исправление критических ошибок и проблем в безопасности.   Версия 2.07 (журнал изменений): Keenetic Lite II Keenetic Omni Официальная поддержка: исправление критических ошибок и проблем в безопасности.   Версия 2.08 (журнал изменений): Keenetic Lite III Keenetic Extra Keenetic Omni II Keenetic Viva Keenetic III Keenetic LTE Официальная поддержка: исправление критических ошибок и проблем в безопасности.   Версия 2.09 (журнал изменений), 2.10 (журнал изменений) и выше: Keenetic Start II Keenetic 4G III rev. B Keenetic Lite III rev. B Keenetic Giga III Keenetic Ultra II Keenetic Extra II Keenetic Air Находятся на активной стадии поддержки и разработки.   Версия 2.09 (журнал изменений), 2.10 (журнал изменений) и выше — неофициальная: Keenetic Lite II Keenetic Lite III Keenetic Omni Keenetic Omni II Keenetic II Keenetic III Keenetic Giga II Keenetic Ultra Keenetic LTE Keenetic DSL Keenetic VOX Выпускается по инициативе разработчиков, официальная поддержка не оказывается. Проверенные временем версии (на данный момент 2.09.C.X) находятся в канале delta, тестовые версии (на данный момент 2.10.A.X) - как всегда в draft). Публикация продолжается в рамках принятой схемы: Здесь, на форуме, сообщения об ошибках принимаются только для версий из draft. Поскольку в поддержке обращение по прошивке с версией из delta завернут, смотри п. 1 По мере выхода проверенных временем версий мы будем собирать их в delta для старых моделей. Гарантией работы будет только то, что кто-то другой на форуме потрудился над прошивкой, пока она была в draft.
McMCC

[Entware-3x] Смотрим эфирное цифровое телевидение DVB-T/T2 через кинетик.

72 posts in this topic

11 час назад, McMCC сказал:

У вас каким-то образом срабатывает переименование фронтеда, попробуйте выполнить команду:

cp -f /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0

после, запустить скан...

Процесс пошел! Но ничего не находит, хотя в этом же положении антенны тюнер ловит нужные каналы(в приложении на телефоне)... 

~ # cp -f /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0
cp: read error: Invalid argument
~ # scan-s2 -o m3u -M -H http://192.168.1.1:8080 /opt/share/dtv-scan-tables/dvb-t/dvb-t2_All > /opt/share/xupnpd/playlists/my_scan.m3u
API major 5, minor 10
ERROR: Cannot open rotor configuration file 'rotor.conf'.
scanning /opt/share/dtv-scan-tables/dvb-t/dvb-t2_All
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 177500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 184500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 191500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 198500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 205500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 212500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 219500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 226500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 474000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 482000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 490000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 498000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 506000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 514000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 522000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 530000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 538000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 546000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 554000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 562000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 570000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 578000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 586000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 594000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 602000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 610000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 618000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 626000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 634000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 642000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 650000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 658000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 666000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 674000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 682000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 690000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 698000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 706000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 714000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 722000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 730000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 738000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 746000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 754000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 762000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 770000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 778000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 786000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 794000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 802000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 810000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 818000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 826000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 834000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 842000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 850000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 858000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
----------------------------------> Using DVB-T2
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
FE_SET_PROPERTY DTV_CLEAR failed: Inappropriate ioctl for device
ERROR: initial tuning failed
dumping lists (0 services)
Done.
~ #
 

Share this post


Link to post
Share on other sites

К сожалению ничего не могу подсказать по этому поводу, по всей видимости не работает сам тюнер, он конечно определяется, но видимо не вяжется с демодулятором, может быть даже по причине переименования интерфейса. Это было сделано специально для работы донглов с установленным дополнительным демодулятором для DVB-T2/DVB-C, что бы не переделывать софт, где за хардкодена работа только с frontend0, если определился adapter0. Судя по вашему логу, нет информации по демодулятору, она должна была быть перед сканированием....

P.S. А что показывает команда ls -l /dev/dvb/adapter0/*

Share this post


Link to post
Share on other sites
19 часов назад, McMCC сказал:

А что показывает команда ls -l /dev/dvb/adapter0/*

~ # ls -l /dev/dvb/adapter0/*
crw-r-----    1 root     root      212,   0 Sep 12 20:21 /dev/dvb/adapter0/demux0
crw-r-----    1 root     root      212,   1 Sep 12 20:21 /dev/dvb/adapter0/dvr0
-rw-r--r--    1 root     root             0 Sep  9 10:36 /dev/dvb/adapter0/frontend0
crw-r-----    1 root     root      212,   3 Sep 12 20:21 /dev/dvb/adapter0/frontend1
crw-r-----    1 root     root      212,   2 Sep 12 20:21 /dev/dvb/adapter0/net0
 

Share this post


Link to post
Share on other sites
4 часа назад, General1111 сказал:

~ # ls -l /dev/dvb/adapter0/*
crw-r-----    1 root     root      212,   0 Sep 12 20:21 /dev/dvb/adapter0/demux0
crw-r-----    1 root     root      212,   1 Sep 12 20:21 /dev/dvb/adapter0/dvr0
-rw-r--r--    1 root     root             0 Sep  9 10:36 /dev/dvb/adapter0/frontend0
crw-r-----    1 root     root      212,   3 Sep 12 20:21 /dev/dvb/adapter0/frontend1
crw-r-----    1 root     root      212,   2 Sep 12 20:21 /dev/dvb/adapter0/net0
 

Ну вот поэтому не работает, у вас /dev/dvb/adapter0/frontend0 создан как файл, а не как устройство. Посему, rm -f /dev/dvb/adapter0/frontend0, по ходу команда cp не копирует устройство, а создает файл. Можно попробовать тогда создать символическую ссылку cp -sf /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0, либо воспользоваться командой mv /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0, она просто переименует устройство.

P.S. А ведь действительно команда cp не умеет копировать устройства, только файлы и директории, лишь только при указании опции -s создавать симлинки.... Что то я запамятовал про это дело, не верно вам сообщил команду выше в моем сообщении...

Share this post


Link to post
Share on other sites
18 часов назад, McMCC сказал:

Можно попробовать тогда создать символическую ссылку cp -sf /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0, либо воспользоваться командой mv /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0, она просто переименует устройство

cp -sf /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0
~ # scan-s2 -o m3u -M -H http://192.168.1.1:8080 /opt/share/dtv-scan-tables/dvb-t/dvb-t2_All > /opt/share/xupnpd/playlists/my_scan.m3u
API major 5, minor 10
ERROR: Cannot open rotor configuration file 'rotor.conf'.
scanning /opt/share/dtv-scan-tables/dvb-t/dvb-t2_All
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 177500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 184500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 191500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 198500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 205500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 212500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 219500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 226500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 474000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 482000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 490000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 498000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 506000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 514000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 522000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 530000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 538000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 546000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 554000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 562000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 570000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 578000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 586000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 594000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 602000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 610000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 618000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 626000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 634000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 642000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 650000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 658000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 666000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 674000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 682000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 690000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 698000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 706000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 714000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 722000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 730000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 738000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 746000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 754000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 762000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 770000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 778000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 786000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 794000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 802000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 810000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 818000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 826000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 834000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 842000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 850000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 858000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
----------------------------------> Using DVB-T2
>>> tune to: 177500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 177500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 177500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 177500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 184500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 184500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 184500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 184500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 191500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 191500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 191500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 191500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 198500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 198500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 198500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 198500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 205500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 205500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 205500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 205500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 212500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 212500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 212500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 212500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 219500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 219500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 219500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 219500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 226500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 226500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 226500:B7C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 226500000
DVB-T2 bandwidth is 7000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 474000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 474000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 474000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 474000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 482000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 482000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 482000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 482000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 490000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 490000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 490000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 490000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 498000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 498000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 498000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 498000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 506000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 506000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 506000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 506000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 514000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 514000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 514000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 514000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 522000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 522000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 522000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 522000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 530000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 530000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 530000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 530000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 538000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 538000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 538000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 538000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 546000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 546000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 546000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 546000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 554000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 554000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 554000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 554000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 562000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 562000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 562000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 562000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 570000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 570000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 570000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 570000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 578000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 578000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 578000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 578000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 586000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 586000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 586000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 586000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 594000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 594000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 594000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 594000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 602000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 602000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 602000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 602000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 610000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 610000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 610000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 610000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 618000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 618000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 618000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 618000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 626000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 626000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 626000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 626000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 634000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 634000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 634000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 634000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 642000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 642000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 642000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 642000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 650000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 650000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 650000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 650000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 658000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 658000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 658000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 658000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 666000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 666000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 666000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 666000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 674000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 674000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 674000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 674000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 682000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 682000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 682000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 682000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 690000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 690000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 690000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 690000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 698000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 698000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 698000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 698000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 706000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 706000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 706000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 706000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 714000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 714000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 714000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 714000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 722000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 722000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 722000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 722000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 730000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 730000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 730000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 730000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 738000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 738000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 738000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 738000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 746000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 746000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 746000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 746000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 754000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 754000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 754000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 754000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 762000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 762000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 762000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 762000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 770000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 770000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 770000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 770000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 778000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 778000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 778000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 778000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 786000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 786000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 786000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 786000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 794000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 794000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 794000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 794000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 802000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 802000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 802000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 802000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 810000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 810000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 810000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 810000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 818000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 818000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 818000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 818000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 826000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 826000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 826000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 826000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 834000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 834000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 834000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 834000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 842000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 842000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 842000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 842000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 850000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 850000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 850000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 850000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
----------------------------------> Using DVB-T2
>>> tune to: 858000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 858000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
>>> tune to: 858000:B8C999M999T999G999S1P0:T:27500:
DVB-T2 frequency is 858000000
DVB-T2 bandwidth is 8000000
FE_SET_PROPERTY TUNE failed: Invalid argument
ERROR: initial tuning failed
dumping lists (0 services)
Done.
~ # mv /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0
~ # scan-s2 -o m3u -M -H http://192.168.1.1:8080 /opt/share/dtv-scan-tables/dvb-t/dvb-t2_All > /opt/share/xupnpd/playlists/my_scan.m3u
API major 5, minor 10
ERROR: Cannot open rotor configuration file 'rotor.conf'.
scanning /opt/share/dtv-scan-tables/dvb-t/dvb-t2_All
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 177500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 184500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 191500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 198500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 205500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 212500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 219500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 226500000 7MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 474000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 482000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 490000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 498000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 506000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
initial transponder 514000000 8MHz AUTO AUTO AUTO AUTO AUTO NONE 0
  Не помогает...

Share this post


Link to post
Share on other sites
18 часов назад, McMCC сказал:

Можно попробовать тогда создать символическую ссылку cp -sf /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0, либо воспользоваться командой mv /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0, она просто переименует устройство

наверное тюнер все таки не подходит.



 

Share this post


Link to post
Share on other sites
9 часов назад, General1111 сказал:

наверное тюнер все таки не подходит.

Через mv пробовали, симлинк удалили перед этим? У вас не видит эта утилита демодулятора, должна была написать его тип, может конечно я ошибаюсь, но вроде бы она отображала тип демодулятора, не помню уже, к тому же вам нужно делать сканирование DVB-T, а не DVB-T/T2, т.к. ваш донгл не поддерживает DVB-T2, нужно подредактировать dvb-t2_All...

P.S. Попробуйте w_scan, у вас должно быть что-то типа этого https://forum.keenetic.net/applications/core/interface/file/attachment.php?id=7843 , только демодулятор должен быть реалтек...

Share this post


Link to post
Share on other sites
15 часов назад, McMCC сказал:

Попробуйте w_scan

w_scan version 20170107 (compiled for DVB API 5.10)
guessing country 'RU', use -c <country> to override
using settings for RUSSIAN FEDERATION
Country identifier RU not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
main:4007: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
 

Это приговор?

Share this post


Link to post
Share on other sites
3 часа назад, General1111 сказал:

w_scan version 20170107 (compiled for DVB API 5.10)
guessing country 'RU', use -c <country> to override
using settings for RUSSIAN FEDERATION
Country identifier RU not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
main:4007: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
 

Это приговор?

А вы проделали операцию с заменой frontend1 на  frontend0? Если да, то это приговор...

Share this post


Link to post
Share on other sites
В 14.9.2017 в 04:10, McMCC сказал:

Попробуйте w_scan

n as: root
root@192.168.1.1's password:


BusyBox v1.25.1 () built-in shell (ash)

~ # w_scan
w_scan
w_scan version 20170107 (compiled for DVB API 5.10)
guessing country 'RU', use -c <country> to override
using settings for RUSSIAN FEDERATION
Country identifier RU not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
        /dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Realtek RTL2832 (DVB-T)": go                                                                                                                                                             od :-)
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.10
frontend 'Realtek RTL2832 (DVB-T)' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T...
Scanning 8MHz frequencies...
474000: (time: 00:00.951)
482000: (time: 00:03.223)
490000: (time: 00:05.384)
498000: (time: 00:07.544)
506000: (time: 00:09.702)
514000: (time: 00:11.869)
522000: (time: 00:14.025)
530000: (time: 00:16.182)
538000: (time: 00:18.339)
546000: (time: 00:19.251)
554000: (time: 00:21.407)
562000: (time: 00:23.567)
570000: (time: 00:25.724)
578000: (time: 00:27.881)
586000: (time: 00:30.037)
594000: (time: 00:32.193)
602000: (time: 00:34.353)
610000: (time: 00:36.513)
618000: (time: 00:38.683)
626000: (time: 00:40.843)
634000: (time: 00:43.001)
642000: (time: 00:45.164)
650000: (time: 00:47.322)
658000: (time: 00:49.478)
666000: (time: 00:51.635)
674000: (time: 00:53.791)
682000: (time: 00:55.948)
690000: (time: 00:58.106)         signal ok:    QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999 (0:0:0)
WARNING: received garbage data: crc = 0x205685e2; expected crc = 0xe5a2a7b7
increasing filter timeout to 31 secs (pid:0 table_id:0 table_id_ext:-1).
WARNING: received garbage data: crc = 0xc6fcddc5; expected crc = 0xe5a2a7b7
        QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999 (0:0:0) : updating transport_stream_id: -> (0:0:1)
WARNING: received garbage data: crc = 0xcd4dade2; expected crc = 0x349655b0
increasing filter timeout to 42 secs (pid:16 table_id:64 table_id_ext:-1).
        QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999 (0:0:1) : updating network_id -> (0:1:1)
698000: (time: 01:11.803)
706000: (time: 01:13.960)
714000: (time: 01:16.118)
722000: (time: 01:18.280)
730000: (time: 01:20.439)
738000: (time: 01:22.601)
746000: (time: 01:24.776)
754000: (time: 01:26.932)
762000: (time: 01:29.101)
770000: (time: 01:31.259)
778000: (time: 01:33.423)
786000: (time: 01:35.582)
794000: (time: 01:37.741)
802000: (time: 01:39.907)
810000: (time: 01:42.075)
818000: (time: 01:44.232)
826000: (time: 01:46.390)
834000: (time: 01:48.547)
842000: (time: 01:50.708)
850000: (time: 01:52.865)
858000: (time: 01:55.024)
tune to: QAM_AUTO f = 690000 kHz I999B8C999D999T999G999Y999 (0:1:1) (time: 01:57.184)
WARNING: received garbage data: crc = 0xf2fcac58; expected crc = 0xe5a2a7c5
increasing filter timeout to 31 secs (pid:0 table_id:0 table_id_ext:-1).
WARNING: received garbage data: crc = 0xf898a498; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x0be8a757; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xb8e0abc7; expected crc = 0xe5a2e1b7
WARNING: received garbage data: crc = 0x002ca9a7; expected crc = 0xe575c7b7
WARNING: received garbage data: crc = 0x31ab1749; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x1288acfc; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x3928de3a; expected crc = 0x61a2beb7
WARNING: received garbage data: crc = 0x6b67c77a; expected crc = 0x73a268b7
WARNING: received garbage data: crc = 0xda22771a; expected crc = 0xe52ea714
WARNING: received garbage data: crc = 0xe520d76a; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x4e736f4e; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x9be2afcf; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x004315b5; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xf7191983; expected crc = 0xffff0fff
        Info: no data from PAT after 31 seconds
WARNING: received garbage data: crc = 0xef47be48; expected crc = 0xe5a2a7b7
increasing filter timeout to 31 secs (pid:0 table_id:0 table_id_ext:-1).
WARNING: received garbage data: crc = 0xaaa0f944; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xb4db8af2; expected crc = 0xe5a2a797
        Info: no data from SDT(actual) after 3 seconds
WARNING: received garbage data: crc = 0xb52f44e2; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xdbcb8f91; expected crc = 0x3894a7b7
WARNING: received garbage data: crc = 0x739cd6eb; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xaa23ba0f; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xaa23ba0f; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xedc9deeb; expected crc = 0xe5a2a7b7
        Info: no data from NIT(actual )after 13 seconds
WARNING: received garbage data: crc = 0x9fb48f15; expected crc = 0xe54ca7b7
WARNING: received garbage data: crc = 0xdeff14f0; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x244f75bd; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xb2477f25; expected crc = 0x2929ffff
WARNING: received garbage data: crc = 0x2122e3af; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x51bc7116; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0x50c1f2fe; expected crc = 0xe5a2a7b7
WARNING: received garbage data: crc = 0xb7f69196; expected crc = 0xe5a2d9b7
WARNING: received garbage data: crc = 0xf0bcfe95; expected crc = 0xe575a7b7
        Info: no data from PAT after 31 seconds
(time: 03:01.867) dumping lists (0 services)
..
Done, scan time: 03:01.867
~ #
W scan нашел каналы. Удалось создать плейлист, но  но он ничем не проигрывается...

my_scan1.m3u    

после замены на pids=0,all через меню  Воспроизведение->Программа всё отлично в VLC.

А как узнать правильные для моего случая пиды ? --- Подобрал! Спасибо за помощь! 

Edited by General1111
добавил информацию

Share this post


Link to post
Share on other sites

Если у вас не прописаны сервисы в канале, то pid'ы выдергивать только вручную из VLC в потоке. Существующие опенсорсные проекты этого не умеют к сожалению....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Recently Browsing   0 members

    No registered users viewing this page.

×