Jump to content
TheBB

Entware-Keenetic & uClibc-ng 1.0.27

Recommended Posts

Предлагается к тесту репозиторий пакетов (сборка за 2017-11-29), собранный с использованием системной библиотеки uClibc-ng версии 1.0.27

Архив для установки на устройства с mipsel архитектурой (все поддерживающие OPKG, кроме DSL, VOX, LTE). Установка стандартна:

Ставим, пробуем, отписываемся... Общее число пакетов: 2500+, возможность установки на носитель с ФС ext4

===

если кто-то отважился, всё ж таки, установить предыдущую версию, то... открываем файл opkg.conf на редактирование и меняем цыфирь 26 на 27, делаем opkg update && opkg upgrade.

Edited by TheBB
new version
  • Thanks 1

Share this post


Link to post
Share on other sites

"Первый, пошел!"  :)

было:

Скрытый текст

 


~ # ldd ../sbin/haproxy 
	libc.so.0 => /lib//libc.so.0 (0x7758e000)
	libz.so.1 => /usr/lib/libz.so.1 (0x7756a000)
	libssl.so.1.0.0 => not found
	libcrypto.so.1.0.0 => not found
	libpcreposix.so.0 => /usr/lib/libpcreposix.so.0 (0x77558000)
	libpcre.so.1 => /usr/lib/libpcre.so.1 (0x7750a000)
	ld-uClibc.so.1 => /lib/ld-uClibc.so.0 (0x77650000)
	libgcc_s.so.1 => /lib//libgcc_s.so.1 (0x774e7000)
~ #

 

стало:

Скрытый текст

 


~ # ldd ../sbin/haproxy 
	libc.so.0 => /opt/lib/libc.so.0 (0x772fb000)
	libz.so.1 => /opt/lib/libz.so.1 (0x772d6000)
	libssl.so.1.0.0 => /opt/lib/libssl.so.1.0.0 (0x77274000)
	libcrypto.so.1.0.0 => /opt/lib/libcrypto.so.1.0.0 (0x770f0000)
	libpcreposix.so.0 => /opt/lib/libpcreposix.so.0 (0x770de000)
	libpcre.so.1 => /opt/lib/libpcre.so.1 (0x7708b000)
	ld-uClibc.so.1 => /opt/lib/ld-uClibc.so.0 (0x773f0000)
~ #

 

~ # haproxy -v
HA-Proxy version 1.7.9-patch02 2017/11/12
Copyright 2000-2017 Willy Tarreau <willy@haproxy.org>

halog_1.7.9-02_keenle.ipk haproxy-nossl_1.7.9-02_keenle.ipk haproxy_1.7.9-02_keenle.ipk

+ картинка

Скрытый текст

screen_215.png

 

  • Thanks 1

Share this post


Link to post
Share on other sites

@TheBB полет отличный, уже поставил minidlna и openssh-sftp-server:

~ # opkg install minidlna
Installing minidlna (1.2.1-2) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/minidlna_1.2.1-2_keenle.ipk
Installing libexif (0.6.21-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libexif_0.6.21-1_keenle.ipk
Installing libjpeg (9a-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libjpeg_9a-1_keenle.ipk
Installing libsqlite3 (3210000-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libsqlite3_3210000-1_keenle.ipk
Installing libid3tag (0.15.1b-4) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libid3tag_0.15.1b-4_keenle.ipk
Installing zlib (1.2.11-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/zlib_1.2.11-1_keenle.ipk
Installing libflac (1.3.2-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libflac_1.3.2-1_keenle.ipk
Installing libvorbis (1.3.5-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libvorbis_1.3.5-1_keenle.ipk
Installing libogg (1.3.2-2) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libogg_1.3.2-2_keenle.ipk
Installing libuuid (2.25.2-4b) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libuuid_2.25.2-4b_keenle.ipk
Installing libffmpegthumbnailer (2.2.0-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libffmpegthumbnailer_2.2.0-1_keenle.ipk
Installing libffmpeg-full (3.2.8-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libffmpeg-full_3.2.8-1_keenle.ipk
Installing libbz2 (1.0.6-3) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libbz2_1.0.6-3_keenle.ipk
Installing alsa-lib (1.1.5-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/alsa-lib_1.1.5-1_keenle.ipk
Installing libopus (1.2.1-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libopus_1.2.1-1_keenle.ipk
Installing libpng (1.6.32-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libpng_1.6.32-1_keenle.ipk
Installing libiconv-full (1.11.1-3) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libiconv-full_1.11.1-3_keenle.ipk
Installing libintl-full (0.19.8.1-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/libintl-full_0.19.8.1-1_keenle.ipk
Configuring zlib.
Configuring libbz2.
Configuring alsa-lib.
Configuring libopus.
Configuring libffmpeg-full.
Configuring libpng.
Configuring libjpeg.
Configuring libffmpegthumbnailer.
Configuring libogg.
Configuring libexif.
Configuring libflac.
Configuring libiconv-full.
Configuring libvorbis.
Configuring libuuid.
Configuring libintl-full.
Configuring libsqlite3.
Configuring libid3tag.
Configuring minidlna.
 

~ # opkg install openssh-sftp-server
Installing openssh-sftp-server (7.6p1-1) to root...
Downloading http://pkg.entware-keenetic.ru/binaries/keenle/test/uClibc-27/openssh-sftp-server_7.6p1-1_keenle.ipk
Configuring openssh-sftp-server.

Edited by enpa
  • Thanks 1

Share this post


Link to post
Share on other sites

Подскажите, вы nginx компилировали с поддержкой ipv6?

Цитата

To enable IPv6 support in nginx, we need to check whether it has been compiled with --with-ipv6 flag

 

Share this post


Link to post
Share on other sites
41 минуту назад, stakp сказал:

Подскажите, вы nginx компилировали с поддержкой ipv6?

должно быть собрано с поддержкой

нет, всё таки, без поддержки... )))

Edited by TheBB
глядю в книгу видю фигу

Share this post


Link to post
Share on other sites
18 минут назад, TheBB сказал:

нет, всё таки, без поддержки... )))

Сделаете? :?

Share this post


Link to post
Share on other sites

что-то я подустал... :)

screen_226.png

Share this post


Link to post
Share on other sites

В догонку: не могу установить пароль на базу MariaDB

 

~ # /opt/etc/init.d/S70mariadbd status
mysqld is already running
~ # '/opt/bin/mysqladmin' -u root password 123456
/opt/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/opt/tmp/mysql.sock' (146)'
Check that mysqld is running and that the socket: '/opt/tmp/mysql.sock' exists!

/opt/bin/mysqladmin: connect to server at 'Keenetic_Ultra' failed
error: 'Unknown MySQL server host 'Keenetic_Ultra' (2)'
Check that mysqld is running on Keenetic_Ultra and that the port is 3306.
You can check this by doing 'telnet Keenetic_Ultra 3306'

 

Share this post


Link to post
Share on other sites

на память, не вспомню...

было

~ # ping Keenetic_Giga
ping: bad address 'Keenetic_Giga'
~ # 

стало

~ # ../etc/init.d/S00hosts start
~ # ping Keenetic_Giga
PING Keenetic_Giga (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: seq=0 ttl=64 time=3.389 ms
64 bytes from 127.0.0.1: seq=1 ttl=64 time=0.290 ms
64 bytes from 127.0.0.1: seq=2 ttl=64 time=0.286 ms
64 bytes from 127.0.0.1: seq=3 ttl=64 time=0.260 ms
64 bytes from 127.0.0.1: seq=4 ttl=64 time=0.261 ms
^C
--- Keenetic_Giga ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.260/0.897/3.389 ms

~ # 

"костыль" нумер адын

~ # cat ../etc/init.d/S00hosts 
#!/bin/sh

hostname=`uname -n`

if [ -f /etc/hosts ]; then
    echo '127.0.0.1 '$hostname' localhost' > /etc/hosts
fi

exit 0
~ # 

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...