Jump to content
  • 0
Sign in to follow this  
vasek00

Модульная Wi-fi релиз 31А5

Question

Релиз 31А5 на K10 (основной) и ExtraII (ТД) при настройках.

 

Скрытый текст

Июл 11 13:48:54 ndm Core::Syslog: the system log has been cleared.
Июл 11 13:49:16 ndm Mws::Candidate: "e4:18:_ExtraII_:2c": acquire started.
Июл 11 13:49:16 ndm Mws::Candidate: "e4:18:_ExtraII_:2c": firmware is up to date.
Июл 11 13:49:16 ndm Mws::Controller: candidate "7203f96c...............700b8bea41" acquire started.
Июл 11 13:49:16 ndm Io::TcpSocket: connected to 192.16....200:80.
Июл 11 13:49:16 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": response code 200 (OK).
Июл 11 13:49:16 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": Content-Length: 639.
Июл 11 13:49:16 ndm Mws::RciClient: "e4:18:_ExtraII_:2c" [11658]: "{"csr":{"csr":"-----BEGIN CERTIFICATE REQUEST-----\nMIHrMIGRAgEA............QZTt1pUj6jLp1J9Kaod2tXA==\n-----END CERTIFICATE REQUEST-----\n","status":[{"status":"message","code":"5505124","ident":"Mws::Member","source":"","warning":"no","message":"sent CSR."}]}}".
Июл 11 13:49:16 ndm Io::TcpSocket: connected to 192.16....200:80.
Июл 11 13:49:21 ndm Io::Http::Client: [11658] unable to receive headers: operation timeout.
Июл 11 13:49:27 ndm Io::TcpSocket: connected to 192.16....200:80.
Июл 11 13:49:27 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": response code 200 (OK).
Июл 11 13:49:27 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": Content-Length: 1936.
Июл 11 13:49:27 ndm [truncated] Mws::RciClient: "e4:18:_ExtraII_:2c": [11658]: "{"show":{"version":{"release":"3.01.A.5.0-0","sandbox":"draft","title":"3.1 Alpha 5","arch":"mips","ndm":{"exact":"0-dbd0fdc","cdate":"6 Jul 2019"},"bsp":{"exact":"0-93fcebc","cdate":"9 Jul 2019"},"ndw":{"version":"3.1.6","features":"wifi5ghz,wifi_button,single_usb_port,new_logo,dual_image,wifi_ft","components":"acl,adguard-dns,base,chilli,cloudcontrol,config-ap,config-client,config-repeater,corewireless,ddns,dhcpd,dlna,dns-https,dns-tls,dot1x,dpi,eoip,ftp,gre,hfsplus,igmp,ip6,ipip,ipsec,l2tp,miniupnpd,monitor,mws,nathelper-ftp,nathelper-h323,nathelper-pptp,nathelper-rtsp,nathelper-sip,netflow,ntfs,openvpn,opkg,opkg-kmod-fs,opkg-kmod-netfilter,opkg-kmod-netfilter-addons,opkg-kmod-tc,opkg-kmod-usbethernet,opkg-kmod-usbip,pingcheck,ppe,pppoe,pptp,skydns,snmp,ssh,sstp,sstp-server,storage,trafficcontrol,transmission,tsmb,udpxy,usb,usblte,usbmodem,usbnet,vpnserver,vpnserver-l2tp,wireguard,wpa-eap,ydns"},"manufacturer":"Zyxel","ve
Июл 11 13:49:27 ndm Io::TcpSocket: connected to 192.16....200:80.
Июл 11 13:49:27 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": response code 200 (OK).
Июл 11 13:49:27 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": Content-Length: 84603.
Июл 11 13:49:27 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": [11658]: excessive (64567 bytes).

Лог на KN10. Второй раз "захват"


Июл 11 14:02:52 ndm Mws::Candidate: "e4:18:_ExtraII_:2c": firmware is up to date.
Июл 11 14:02:52 ndm Mws::Candidate: "e4:18:_ExtraII_:2c": acquire started.
Июл 11 14:02:52 ndm Mws::Controller: candidate "7203f96c-......bea41" acquire started.
Июл 11 14:02:52 ndm Io::TcpSocket: connected to 192.16....200:80.
Июл 11 14:02:52 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": response code 200 (OK).
Июл 11 14:02:52 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": Content-Length: 635.
Июл 11 14:02:52 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": [13422]: "{"csr":{"csr":"-----BEGIN CERTIFICATE REQUEST-----\nMIHqMI.........BY/wM0J729w3\n-----END CERTIFICATE REQUEST-----\n","status":[{"status":"message","code":"5505124","ident":"Mws::Member","source":"","warning":"no","message":"sent CSR."}]}}".
Июл 11 14:02:52 ndm Io::TcpSocket: connected to 192.16....200:80.
Июл 11 14:02:57 ndm Io::Http::Client: [13422] unable to receive headers: operation timeout.

Надпись проверить состояние, проверяем 

Июл 11 14:04:55 ndm Core::Syslog: the system log has been cleared.
Июл 11 14:04:58 ndm Mws::Candidate: "e4:18:_ExtraII_:2c": revisit started.
Июл 11 14:04:58 ndm Mws::Controller: candidate "7203f96c-........0b8bea41" revisit started.
Июл 11 14:04:58 ndm Io::TcpSocket: connected to 192.16.....200:80.
Июл 11 14:04:59 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": response code 200 (OK).
Июл 11 14:04:59 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": Content-Length: 1936.
Июл 11 14:04:59 ndm [truncated] Mws::RciClient: "e4:18:_ExtraII_:2c": [13827]: "{"show":{"version":{"release":"3.01.A.5.0-0","sandbox":"draft","title":"3.1 Alpha 5","arch":"mips","ndm":{"exact":"0-dbd0fdc","cdate":"6 Jul 2019"},"bsp":{"exact":"0-93fcebc","cdate":"9 Jul 2019"},"ndw":{"version":"3.1.6","features":"wifi5ghz,wifi_button,single_usb_port,new_logo,dual_image,wifi_ft","components":"acl,adguard-dns,base,chilli,cloudcontrol,config-ap,config-client,config-repeater,corewireless,ddns,dhcpd,dlna,dns-https,dns-tls,dot1x,dpi,eoip,ftp,gre,hfsplus,igmp,ip6,ipip,ipsec,l2tp,miniupnpd,monitor,mws,nathelper-ftp,nathelper-h323,nathelper-pptp,nathelper-rtsp,nathelper-sip,netflow,ntfs,openvpn,opkg,opkg-kmod-fs,opkg-kmod-netfilter,opkg-kmod-netfilter-addons,opkg-kmod-tc,opkg-kmod-usbethernet,opkg-kmod-usbip,pingcheck,ppe,pppoe,pptp,skydns,snmp,ssh,sstp,sstp-server,storage,trafficcontrol,transmission,tsmb,udpxy,usb,usblte,usbmodem,usbnet,vpnserver,vpnserver-l2tp,wireguard,wpa-eap,ydns"},"manufacturer":"Zyxel","ve
Июл 11 14:04:59 ndm Io::TcpSocket: connected to 192.16.....200:80.
Июл 11 14:04:59 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": response code 200 (OK).
Июл 11 14:04:59 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": Content-Length: 84603.
Июл 11 14:04:59 ndm Mws::RciClient: "e4:18:_ExtraII_:2c": [13827]: excessive (64567 bytes).

 

Раньше хоть можно было, сброс на ExtraII (настройки по умолчанию на Wi-fi) потом ее в ТД (путем изменения режима) и далее на KN10 подключать, теперь это не проходит. Как были настройки по умолчанию на Wi-fi в ExtraII так они и остались и закрыты еще (SSID и пароль). Клиент видит SSID от KN10 так и новый SSID от ExtraII. Пробовал два раза с ExtraII (сбросом к заводским) так и не добился.

 

Возможно какие-то настройки на KN10 конечно влияют

Скрытый текст

schedule schedule1
    description 24work
    action stop 0 0 *
    action start 0 7 *
!
schedule schedule2
    description 50work
    action start 30 8 *
    action stop 0 22 *

interface WifiMaster0
    country-code RU
    compatibility GN
    channel 4
    channel width 40-below
    power 75
    rekey-interval 3600
    vht
    up
!
interface WifiMaster0/AccessPoint0
    rename AccessPoint
    description "Wi-Fi access point"
    mac access-list type none
    security-level private
    authentication wpa-psk ns3 
    encryption enable
    encryption wpa2
    ip dhcp client dns-routes
    ip dhcp client name-servers
    ssid Имя_1
    wmm
    rrm
    up
    schedule schedule1
!

interface WifiMaster1
    country-code RU
    compatibility N+AC
    channel 36
    channel width 40-above/80
    power 75
    rekey-interval 3600
    band-steering
    band-steering preference 5
    beamforming explicit mu-mimo
    up
!
interface WifiMaster1/AccessPoint0
    rename AccessPoint_5G
    description "5Ghz Wi-Fi access point"
    mac access-list type none
    security-level private
    authentication wpa-psk ns3 
    encryption enable
    encryption wpa2
    ip dhcp client dns-routes
    ip dhcp client name-servers
    ssid Имя_2
    wmm
    rrm
    ft mdid KN
    ft enable
    up
    schedule schedule2
!

 

213563105_-2.jpg.f8063e7ee7a5a4d4e546505e10b50f13.jpg

32374129_-21.thumb.jpg.da30310e5c3a455e74ccf508681d31b4.jpg

305669434_-22.jpg.ed4c4b19d849a9276151f5ca8f58c1a9.jpg

 

 

Share this post


Link to post
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...