умный дом Попытка установки Node-RED (Графический конфигуратор для интернета вещей)

iFinder · November 21, 2019

10 минут назад, TheBB сказал:

выбрано по одному варианту представления графиков (надо ж тестить хоть что-то ))) )

Увидел, что установили ДопУзлы 'node-red-dashboard' и 'node-red-node-ping'.

Пингуете с помощью ДопУзла 'node-red-node-ping'.

И настроили 6 вариантов Графиков ДопУзел из 'node-red-dashboard'.

А 'node-red-daemon' что делает ?

TheBB · November 21, 2019

1 минуту назад, iFinder сказал:

А 'node-red-daemon' что делает ?

Понятия не имею, проверял установку доп. модулей. Кстати, ставятся не все (но к теме это не относится).

iFinder · November 21, 2019

3 минуты назад, TheBB сказал:

14 минуты назад, iFinder сказал:

Даже когда запускаете при загрузке и без указания Рабочей папки ?

Видимо, да.

Но это вроде не при загрузке самой Entware ?

TheBB · November 21, 2019

18 минут назад, iFinder сказал:

Но это вроде не при загрузке самой Entware ?

Скрытый текст


~ # 
~ # date
Thu Nov 21 17:54:45 MSK 2019
~ # 
~ # reboot
Connection to 192.168.8.1 closed by remote host.
Connection to 192.168.8.1 closed.
xxx@xxx:~ ---
➜ ssh root@192.168.8.1 -p 222
root@192.168.8.1's password: 


BusyBox v1.31.1 () built-in shell (ash)

~ # date
Thu Nov 21 18:01:19 MSK 2019
~ # 
~ # cat /opt/var/log/node-red.log 
...
21 Nov 18:06:52 - [info] Installing module: node-red-contrib-snap4city-developer, version: 0.1.5
21 Nov 18:09:03 - [info] Installed module: node-red-contrib-snap4city-developer
21 Nov 18:09:04 - [info] Added node types:
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search-near-service
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search-within-gps-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search-within-wkt-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search-within-stored-wkt-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search-by-municipality
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-search-by-queryid
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-info-dev
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:service-info-mapped
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:full-text-search-dev
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:full-text-search-within-wkt-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:full-text-search-within-gps-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:full-text-search-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:full-text-search-exp
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:event-search-dev
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:event-search-exp
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:event-search-within-wkt-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:event-search-within-gps-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:event-search-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:address-geometry-search-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:address-search-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:geometry-search-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:address-poi-search-by-text
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:address-poi-search-by-text-exp
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:address-poi-search-by-text-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:bus-routes-search
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:bus-routes-search-near-gps-position
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:bus-routes-search-within-gps-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:bus-routes-search-within-wkt-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:bus-routes-search-within-stored-wkt-area
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:tpl-routes
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:tpl-stops
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:check-exist-job
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:check-exist-trigger
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:is-in-standby-mode
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:is-shutdown
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:is-started
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-currently-executing-jobs
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-job-detail
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-triggers-of-job
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-job-group-names
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-trigger-group-names
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-paused-trigger-groups
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-job-fire-times
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:get-system-status
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:trigger-job
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:pause-all
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:pause-job
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:pause-jobs
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:pause-trigger
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:pause-triggers
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:resume-all
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:resume-job
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:resume-jobs
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:resume-trigger
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:resume-triggers
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:notificator-history-events
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:descriptive-statistics
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:trend-plot
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:time-series-predictions
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:machine-learning-predictions
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:anomaly-detection
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:datagate insert
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:datagate search
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:datagate create
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:datagate-credentials
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:mapping
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:set-mapping
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:plumber-data-analytic
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:snap4city-authentication-dev
21 Nov 18:09:04 - [info]  - node-red-contrib-snap4city-developer:portia-crawler
~ #

iFinder · November 21, 2019

Спасибо Вам за проведённые исследования.

Получается, что у Вас так:

1. Запуск Node-Red ПРИ ЗАГРУЗКЕ БЕЗ указания Рабочей папки приводит к тому, что Node-Red запускается и Рабочей папкой считает '/opt/lib/node_modules/node-red/'. При этом тестовый файл записывается в этой папке, а ДопУзлы устанавливаются в папку '/opt/lib/node_modules/node-red/node_modules' и NodeRed их видит.

2. Запуск Node-Red ВРУЧНУЮ ПОСЛЕ ЗАГРУЗКИ БЕЗ указания Рабочей папки приводит к тем же результатам, что и в п.1.

3. Запуск Node-Red ПРИ ЗАГРУЗКЕ С явным указанием Рабочей папки '/opt/root/.node-red' приводит к тем же результатам, что и в п.1.

Единственно, что меня смущает, что у Вас Рабочая папка в начале имени не имеет знака точки '.'. Осваивая работу в Node-Red, я встречал в инете описания настроек, в которых имя Рабочей папки начиналось со знака точки '.'

Надо будет найти возможность и установить Optware и Node-Red с нуля...

TheBB · November 21, 2019

1 да, кроме тестового файла, он, или по полному пути, или в "/opt/root"

~ # find /opt -name "test.file.txt"
/opt/tmp/test.file.txt
/opt/root/test.file.txt
~ #

2 см. 1

3 см. 1 (у меня в "/opt/root" от "node" только директория ".npm" и файл настроек ".npmrc")

~ # ls -al .npm*
-rw-r--r-- 1 root root 2567 Nov 16 17:06 .npmrc

.npm:
total 24
drwxr-xr-x  5 root root 4096 Nov 21 18:09 .
drwxr-xr-x 15 root root 4096 Nov 21 17:17 ..
-rw-r--r--  1 root root  173 Nov 21 18:09 anonymous-cli-metrics.json
drwxr-xr-x  5 root root 4096 Oct 27 13:09 _cacache
drwxr-xr-x  2 root root 4096 Nov 21 18:08 _locks
drwxr-xr-x  2 root root 4096 Nov 21 18:04 _logs
~ #

31 минуту назад, iFinder сказал:

Единственно, что меня смущает...

см. 3

iFinder · November 21, 2019

5 минут назад, TheBB сказал:

40 минут назад, iFinder сказал:

Единственно, что меня смущает...

см. 3

Я имел ввиду, что встречал Рабочую папку '.node-red', но в Вашей Node-Red её совсем нет.

TheBB · November 21, 2019

Это при "классической установке" в домашнюю директорию пользователя. А я всё перенёс в "/opt/lib/node_modules/...".

iFinder · November 21, 2019

Нашёл нечто, что может объяснить различие моей Node-Red и Вашей.

Вот фрагмент файла: '/opt/lib/node_modules/node-red/red.js':

Скрытый текст

if (parsedArgs.settings) {
// User-specified settings file
settingsFile = parsedArgs.settings;
} else if (parsedArgs.userDir && fs.existsSync(path.join(parsedArgs.userDir,"settings.js"))) {
// User-specified userDir that contains a settings.js
settingsFile = path.join(parsedArgs.userDir,"settings.js");
} else {
if (fs.existsSync(path.join(process.env.NODE_RED_HOME,".config.json"))) {
// NODE_RED_HOME contains user data - use its settings.js
settingsFile = path.join(process.env.NODE_RED_HOME,"settings.js");
} else if (process.env.HOMEPATH && fs.existsSync(path.join(process.env.HOMEPATH,".node-red",".config.json"))) {
// Consider compatibility for older versions
settingsFile = path.join(process.env.HOMEPATH,".node-red","settings.js");
} else {
var userDir = parsedArgs.userDir || path.join(process.env.HOME || process.env.USERPROFILE || process.env.HOMEPATH,".node-red");
var userSettingsFile = path.join(userDir,"settings.js");
if (fs.existsSync(userSettingsFile)) {
// $HOME/.node-red/settings.js exists
settingsFile = userSettingsFile;
} else {
var defaultSettings = path.join(__dirname,"settings.js");
var settingsStat = fs.statSync(defaultSettings);
if (settingsStat.mtime.getTime() <= settingsStat.ctime.getTime()) {
// Default settings file has not been modified - safe to copy
fs.copySync(defaultSettings,userSettingsFile);
settingsFile = userSettingsFile;
} else {
// Use default settings.js as it has been modified
settingsFile = defaultSettings;
}
}
}
}

И еще у меня:

~ # echo $HOME
/opt/root
~ # echo $NODE_RED_HOME

~ #

iFinder · November 21, 2019

2 минуты назад, TheBB сказал:

Это при "классической установке" в домашнюю директорию пользователя. А я всё перенёс в "/opt/lib/node_modules/...".

А как выглядел перенос ? и на каком этапе ?

TheBB · November 21, 2019

22 минуты назад, iFinder сказал:

Нашёл нечто, что может объяснить различие моей Node-Red и Вашей.

Не уверен, хотя и правил где-то что-то.

23 минуты назад, iFinder сказал:

И еще у меня:

Аналогично. Ничего не объявлял, наверно, можно и задать, типа:

~ # echo $NODE_RED_HOME

~ # export NODE_RED_HOME=/opt/var/lib/node-red
~ # echo $NODE_RED_HOME
/opt/var/lib/node-red
~ # unset NODE_RED_HOME
~ # echo $NODE_RED_HOME

~ #

25 минут назад, iFinder сказал:

А как выглядел перенос ? и на каком этапе ?

уже не вспомню.

Lstt · January 28, 2020

Можно вкратце обобщить? Как, имеет смысл устанавливать? Можно порядок действий, основанный на вашем опыте?

TheBB · January 29, 2020

В 28.01.2020 в 20:18, Lstt сказал:

Можно вкратце обобщить? Как, имеет смысл устанавливать? Можно порядок действий, основанный на вашем опыте?

opkg install http://bin.entware.net/mipselsf-k3.4/keenetic/test/node-red_1.0.3-1_mipsel-3.4.ipk

log:

Скрытый текст


ssh root@ip.add.re.ss -p 222
root@ip.add.re.ss's password: 


BusyBox v1.31.1 () built-in shell (ash)

~ # opkg install http://bin.entware.net/mipselsf-k3.4/keenetic/test/node-red_1.0.3-1_mipsel-3.4.ipk
Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/test/node-red_1.0.3-1_mipsel-3.4.ipk
Installing node-red (1.0.3-1) to root...
Installing node (v8.16.1-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/node_v8.16.1-1_mipsel-3.4.ipk
Installing node-npm (v8.16.1-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/node-npm_v8.16.1-1_mipsel-3.4.ipk
Configuring node.
Configuring node-npm.
Configuring node-red.
~ # 
~ # /opt/etc/init.d/S99node-red start
Starting Node-Red..
~ # ps | grep -v grep | grep node-red
  831 root      125m R    {node-red} /opt/bin/node /opt/bin/node-red -v -u /opt/lib/node/node-red
~ # ps | grep -v grep | grep node-red
  831 root      134m S    node-red
~ # 
~ # /opt/etc/init.d/S99node-red restart
Restarting Node-Red..
Stopping Node-Red..
Starting Node-Red..
Restarted.
~ # 
~ # ps | grep -v grep | grep node-red
  926 root      135m S    node-red
~ # 
~ # /opt/etc/init.d/S99node-red stop
Stopping Node-Red..
~ # 
~ # ps | grep -v grep | grep node-red
~ # 
~ # cat /opt/var/log/node-red.log 

Node-RED service start: Wed Jan 29 21:14:49 MSK 2020
Logging to 
29 Jan 21:15:08 - [info] 

Welcome to Node-RED
===================

29 Jan 21:15:08 - [info] Node-RED version: v1.0.3
29 Jan 21:15:08 - [info] Node.js  version: v8.16.1
29 Jan 21:15:08 - [info] Linux 4.9-ndm-4 mipsel LE
29 Jan 21:15:20 - [info] Loading palette nodes
29 Jan 21:15:36 - [info] Settings file  : /opt/lib/node/node-red/settings.js
29 Jan 21:15:36 - [info] Context store  : 'default' [module=memory]
29 Jan 21:15:36 - [info] User directory : /opt/lib/node/node-red
29 Jan 21:15:36 - [warn] Projects disabled : editorTheme.projects.enabled=false
29 Jan 21:15:36 - [info] Flows file     : /opt/lib/node/node-red/flows_Keenetic_Omni.json
29 Jan 21:15:36 - [info] Creating new flow file
29 Jan 21:15:36 - [warn] 

---------------------------------------------------------------------
Your flow credentials file is encrypted using a system-generated key.

If the system-generated key is lost for any reason, your credentials
file will not be recoverable, you will have to delete it and re-enter
your credentials.

You should set your own key using the 'credentialSecret' option in
your settings file. Node-RED will then re-encrypt your credentials
file using your chosen key the next time you deploy a change.
---------------------------------------------------------------------

29 Jan 21:15:36 - [info] Server now running at http://127.0.0.1:1880/
29 Jan 21:15:36 - [info] Starting flows
29 Jan 21:15:36 - [info] Started flows
29 Jan 21:16:21 - [info] Stopping flows
29 Jan 21:16:21 - [info] Stopped flows

Node-RED service stop: Wed Jan 29 21:16:24 MSK 2020

Node-RED service start: Wed Jan 29 21:16:27 MSK 2020
Logging to 
29 Jan 21:16:45 - [info] 

Welcome to Node-RED
===================

29 Jan 21:16:45 - [info] Node-RED version: v1.0.3
29 Jan 21:16:45 - [info] Node.js  version: v8.16.1
29 Jan 21:16:45 - [info] Linux 4.9-ndm-4 mipsel LE
29 Jan 21:16:56 - [info] Loading palette nodes
29 Jan 21:17:10 - [info] Settings file  : /opt/lib/node/node-red/settings.js
29 Jan 21:17:10 - [info] Context store  : 'default' [module=memory]
29 Jan 21:17:10 - [info] User directory : /opt/lib/node/node-red
29 Jan 21:17:10 - [warn] Projects disabled : editorTheme.projects.enabled=false
29 Jan 21:17:10 - [info] Flows file     : /opt/lib/node/node-red/flows_Keenetic_Omni.json
29 Jan 21:17:11 - [info] Creating new flow file
29 Jan 21:17:11 - [warn] 

---------------------------------------------------------------------
Your flow credentials file is encrypted using a system-generated key.

If the system-generated key is lost for any reason, your credentials
file will not be recoverable, you will have to delete it and re-enter
your credentials.

You should set your own key using the 'credentialSecret' option in
your settings file. Node-RED will then re-encrypt your credentials
file using your chosen key the next time you deploy a change.
---------------------------------------------------------------------

29 Jan 21:17:11 - [info] Starting flows
29 Jan 21:17:11 - [info] Started flows
29 Jan 21:17:11 - [info] Server now running at http://127.0.0.1:1880/
29 Jan 21:17:33 - [info] Stopping flows
29 Jan 21:17:33 - [info] Stopped flows

Node-RED service stop: Wed Jan 29 21:17:36 MSK 2020
~ # 
~ # reboot

Connection to ip.add.re.ss closed by remote host.
Connection to ip.add.re.ss closed.

xxx@xxx:~ ------------------
➜ ssh root@ip.add.re.ss -p 222
root@ip.add.re.ss's password: 


BusyBox v1.31.1 () built-in shell (ash)

~ # ps | grep -v grep | grep node-red
  500 root      135m S    node-red
~ # 
...

iFinder · January 30, 2020

В 28.01.2020 в 20:18, Lstt сказал:

Можно вкратце обобщить? Как, имеет смысл устанавливать? Можно порядок действий, основанный на вашем опыте?

Конечно можно. В этой теме достаточно обобщений - Специально для начинающих и писалось.

Можете даже на эти обобщения ссылки сделать.

Edited January 30, 2020 by iFinder

TheBB · January 30, 2020

8 минут назад, iFinder сказал:

Конечно можно. В этой теме достаточно обобщений - Специально для начинающих и писалось.

Начинаем "с чистого листа", т.к. `nod-red` "опакечен". Ждём-с инструкции...

iFinder · January 30, 2020

7 минут назад, TheBB сказал:

Начинаем "с чистого листа", т.к. `nod-red` "опакечен". Ждём-с инструкции...

Правильно ли я понимаю, что раньше `nod-red` был пакетом `npm`, который был пакетом `Entware`, а сейчас `nod-red` стал самостоятельным пакетом `Entware`, т.е. в Вашей терминологии опакечен ?

Ждём-с инструкции... от кого ?

И как узнать, что они появились ?

Edited January 30, 2020 by iFinder

TheBB · January 30, 2020

Почти, "опакечен" (создан пакет `node-red`, см. аналоги node-* в owrt) для "удобства пользования". Можно, как и раньше, ставить руками с помощью `npm ...`, править пути, создавать скрипты... или установить пакет. AFAIR, я инструкций не обещал )))

25 минут назад, iFinder сказал:

И как узнать, что они появились ?

Инструкции? Как напишите, так и появятся. Можно будет и в "решения" закинуть, если кейс интересный будет )))

iFinder · January 30, 2020

1 час назад, TheBB сказал:

Почти, "опакечен"

1. Почему почти ?

2. В чём разница:

http://bin.entware.net/mipselsf-k3.4/Packages.html - Это пакеты Entware. Ясно.

http://bin.entware.net/mipselsf-k3.4/keenetic/Packages.html - Это пакеты Entware для Keenetic. Но как это понимать ? Что значит для Keenetic ? Ведь все пакеты Entware тоже подходят для Keenetic.

http://bin.entware.net/mipselsf-k3.4/keenetic/test/ - Это тестовые пакеты Entware для Keenetic. И это как понимать, что curl есть и здесь и в http://bin.entware.net/mipselsf-k3.4/Packages.html ?

3. Кому спасибо сказать за опакечивание ?

1 час назад, TheBB сказал:

Инструкции? Как напишите, так и появятся.

4. Вы предполагаете, что там сложности возникнут, из-за которых инструкцию писать придётся ?

Edited January 30, 2020 by iFinder

TheBB · January 30, 2020

15 минут назад, iFinder сказал:

Это пакеты Entware. Ясно.

универсальные для всех MIPSel железяк

16 минут назад, iFinder сказал:

Что значит для Keenetic ?

специфика, пакеты только для Keenetic`ов, напр., `libndm`

16 минут назад, iFinder сказал:

Это тестовые пакеты Entware для Keenetic.

всякие тестовые сборки, универсальные для всех MIPSel железяк

17 минут назад, iFinder сказал:

... curl есть и здесь и в...

собран с доп. опциями (см. конфиг от и ниже) (!старая версия, будет удалён)

22 минуты назад, iFinder сказал:

1. Почему почти ?

всё, что я выше нацарапал

23 минуты назад, iFinder сказал:

3. Кому спасибо сказать за опакечивание ?

дык, кому хотите )))

24 минуты назад, iFinder сказал:

4. Вы предполагаете, что там сложности возникнут, из-за которых инструкцию писать придётся ?

практическое применение (Вам же `nod-red` зачем-то понадобился, да и выше товарищ заинтересовался)

Lstt · February 2, 2020

В 29.01.2020 в 22:02, TheBB сказал:


opkg install http://bin.entware.net/mipselsf-k3.4/keenetic/test/node-red_1.0.3-1_mipsel-3.4.ipk

log:

Показать содержимое



ssh root@ip.add.re.ss -p 222
root@ip.add.re.ss's password: 


BusyBox v1.31.1 () built-in shell (ash)

~ # opkg install http://bin.entware.net/mipselsf-k3.4/keenetic/test/node-red_1.0.3-1_mipsel-3.4.ipk
Downloading http://bin.entware.net/mipselsf-k3.4/keenetic/test/node-red_1.0.3-1_mipsel-3.4.ipk
Installing node-red (1.0.3-1) to root...
Installing node (v8.16.1-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/node_v8.16.1-1_mipsel-3.4.ipk
Installing node-npm (v8.16.1-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/node-npm_v8.16.1-1_mipsel-3.4.ipk
Configuring node.
Configuring node-npm.
Configuring node-red.
~ # 
~ # /opt/etc/init.d/S99node-red start
Starting Node-Red..
~ # ps | grep -v grep | grep node-red
  831 root      125m R    {node-red} /opt/bin/node /opt/bin/node-red -v -u /opt/lib/node/node-red
~ # ps | grep -v grep | grep node-red
  831 root      134m S    node-red
~ # 
~ # /opt/etc/init.d/S99node-red restart
Restarting Node-Red..
Stopping Node-Red..
Starting Node-Red..
Restarted.
~ # 
~ # ps | grep -v grep | grep node-red
  926 root      135m S    node-red
~ # 
~ # /opt/etc/init.d/S99node-red stop
Stopping Node-Red..
~ # 
~ # ps | grep -v grep | grep node-red
~ # 
~ # cat /opt/var/log/node-red.log 

Node-RED service start: Wed Jan 29 21:14:49 MSK 2020
Logging to 
29 Jan 21:15:08 - [info] 

Welcome to Node-RED
===================

29 Jan 21:15:08 - [info] Node-RED version: v1.0.3
29 Jan 21:15:08 - [info] Node.js  version: v8.16.1
29 Jan 21:15:08 - [info] Linux 4.9-ndm-4 mipsel LE
29 Jan 21:15:20 - [info] Loading palette nodes
29 Jan 21:15:36 - [info] Settings file  : /opt/lib/node/node-red/settings.js
29 Jan 21:15:36 - [info] Context store  : 'default' [module=memory]
29 Jan 21:15:36 - [info] User directory : /opt/lib/node/node-red
29 Jan 21:15:36 - [warn] Projects disabled : editorTheme.projects.enabled=false
29 Jan 21:15:36 - [info] Flows file     : /opt/lib/node/node-red/flows_Keenetic_Omni.json
29 Jan 21:15:36 - [info] Creating new flow file
29 Jan 21:15:36 - [warn] 

---------------------------------------------------------------------
Your flow credentials file is encrypted using a system-generated key.

If the system-generated key is lost for any reason, your credentials
file will not be recoverable, you will have to delete it and re-enter
your credentials.

You should set your own key using the 'credentialSecret' option in
your settings file. Node-RED will then re-encrypt your credentials
file using your chosen key the next time you deploy a change.
---------------------------------------------------------------------

29 Jan 21:15:36 - [info] Server now running at http://127.0.0.1:1880/
29 Jan 21:15:36 - [info] Starting flows
29 Jan 21:15:36 - [info] Started flows
29 Jan 21:16:21 - [info] Stopping flows
29 Jan 21:16:21 - [info] Stopped flows

Node-RED service stop: Wed Jan 29 21:16:24 MSK 2020

Node-RED service start: Wed Jan 29 21:16:27 MSK 2020
Logging to 
29 Jan 21:16:45 - [info] 

Welcome to Node-RED
===================

29 Jan 21:16:45 - [info] Node-RED version: v1.0.3
29 Jan 21:16:45 - [info] Node.js  version: v8.16.1
29 Jan 21:16:45 - [info] Linux 4.9-ndm-4 mipsel LE
29 Jan 21:16:56 - [info] Loading palette nodes
29 Jan 21:17:10 - [info] Settings file  : /opt/lib/node/node-red/settings.js
29 Jan 21:17:10 - [info] Context store  : 'default' [module=memory]
29 Jan 21:17:10 - [info] User directory : /opt/lib/node/node-red
29 Jan 21:17:10 - [warn] Projects disabled : editorTheme.projects.enabled=false
29 Jan 21:17:10 - [info] Flows file     : /opt/lib/node/node-red/flows_Keenetic_Omni.json
29 Jan 21:17:11 - [info] Creating new flow file
29 Jan 21:17:11 - [warn] 

---------------------------------------------------------------------
Your flow credentials file is encrypted using a system-generated key.

If the system-generated key is lost for any reason, your credentials
file will not be recoverable, you will have to delete it and re-enter
your credentials.

You should set your own key using the 'credentialSecret' option in
your settings file. Node-RED will then re-encrypt your credentials
file using your chosen key the next time you deploy a change.
---------------------------------------------------------------------

29 Jan 21:17:11 - [info] Starting flows
29 Jan 21:17:11 - [info] Started flows
29 Jan 21:17:11 - [info] Server now running at http://127.0.0.1:1880/
29 Jan 21:17:33 - [info] Stopping flows
29 Jan 21:17:33 - [info] Stopped flows

Node-RED service stop: Wed Jan 29 21:17:36 MSK 2020
~ # 
~ # reboot

Connection to ip.add.re.ss closed by remote host.
Connection to ip.add.re.ss closed.

xxx@xxx:~ ------------------
➜ ssh root@ip.add.re.ss -p 222
root@ip.add.re.ss's password: 


BusyBox v1.31.1 () built-in shell (ash)

~ # ps | grep -v grep | grep node-red
  500 root      135m S    node-red
~ # 
...

Спасибо большое! Всё работает! Есть ли шанс как-то заставить устанавливаться пакетам npm на Omni (KN-1410) со 128 Мб памяти? При установки практически любых пакетов npm - полная загрузка проца, память 100-108 мб, потом подвисание и вылет установки..Может быть есть какие ключи запусками, например, ограничивающие потребление нодой памяти, ресурсов проца?

TheBB · February 2, 2020

3 часа назад, Lstt сказал:

на Omni (KN-1410)

на нём и проверял (приложенный лог) + swap 2 GB

3 часа назад, Lstt сказал:

При установки практически любых пакетов npm

приведите пример (или лог установки), т.к. не все пакеты могут быть установлены.

Lstt · February 3, 2020

В 02.02.2020 в 12:15, TheBB сказал:

на нём и проверял (приложенный лог) + swap 2 GB

приведите пример (или лог установки), т.к. не все пакеты могут быть установлены.

Да, создал раздел swap 2Гб, включил Zram вот лог

Цитата

Installing node-red (1.0.3-1) to root...
Installing libnghttp2 (1.40.0-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/libnghttp2_1.40.0-1_mipsel-3.4.ipk
Installing libuv (1.32.0-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/libuv_1.32.0-1_mipsel-3.4.ipk
Installing libhttp-parser (2.9.2-2) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/libhttp-parser_2.9.2-2_mipsel-3.4.ipk
Installing node (v8.16.1-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/node_v8.16.1-1_mipsel-3.4.ipk
Installing node-npm (v8.16.1-1) to root...
Downloading http://bin.entware.net/mipselsf-k3.4/node-npm_v8.16.1-1_mipsel-3.4.ipk
Configuring libnghttp2.
Configuring libuv.
Configuring libhttp-parser.
Configuring node.
Configuring node-npm.
Configuring node-red.
~ #
~ # npm install node-red-contrib-mqtt-broker
npm WARN deprecated mongodb@2.1.21: Please upgrade to 2.2.19 or higher
npm WARN deprecated node-uuid@1.4.8: Use uuid module instead
npm ERR! cb() never called!

npm ERR! This is an error with npm itself. Please report this error at:
npm ERR! <https://npm.community>

npm ERR! A complete log of this run can be found in:
npm ERR! /opt/root/.npm/_logs/2020-02-03T12_54_06_037Z-debug.log
~ #

Edited February 3, 2020 by Lstt

TheBB · February 3, 2020

А почему не в web:

Скрытый текст



-----------------------------------------------------------
2020-02-03T13:22:36.272Z Install : node-red-contrib-mqtt-broker 0.2.4

2020-02-03T13:22:35.958Z npm install --no-audit --no-update-notifier --save --save-prefix="~" --production node-red-contrib-mqtt-broker@0.2.4
2020-02-03T13:24:28.860Z [err] npm
2020-02-03T13:24:28.882Z [err]  WARN deprecated mongodb@2.1.21: Please upgrade to 2.2.19 or higher
2020-02-03T13:24:35.355Z [err] npm
2020-02-03T13:24:35.358Z [err]  
2020-02-03T13:24:35.360Z [err] WARN
2020-02-03T13:24:35.367Z [err]  deprecated node-uuid@1.4.8: Use uuid module instead

-----------------------------------------------------------
2020-02-03T13:31:16.863Z Install : node-red-contrib-mqtt-broker 0.2.4

2020-02-03T13:32:10.360Z [out] 
2020-02-03T13:32:10.360Z [out] > fs-ext@0.5.0 install /opt/lib/node/node-red/node_modules/fs-ext
2020-02-03T13:32:10.360Z [out] > node-gyp configure build
2020-02-03T13:32:10.360Z [out] 
2020-02-03T13:32:31.403Z [err] gyp
2020-02-03T13:32:32.012Z [err]  WARN install got an error, rolling back install
2020-02-03T13:32:32.012Z [err] gyp ERR! configure error 
2020-02-03T13:32:32.012Z [err] gyp ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:32:32.012Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:32:32.012Z [err] gyp ERR! command "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"
2020-02-03T13:32:32.012Z [err] gyp ERR! cwd /opt/lib/node/node-red/node_modules/fs-ext
2020-02-03T13:32:32.012Z [err] gyp ERR! node -v v8.16.1
2020-02-03T13:32:32.012Z [err] gyp ERR! node-gyp -v v3.8.0
2020-02-03T13:32:32.012Z [err] gyp ERR! not ok 
2020-02-03T13:32:33.243Z [out] 
2020-02-03T13:32:33.243Z [out] > kerberos@0.0.24 install /opt/lib/node/node-red/node_modules/kerberos
2020-02-03T13:32:33.243Z [out] > (node-gyp rebuild) || (exit 0)
2020-02-03T13:32:33.243Z [out] 
2020-02-03T13:32:48.976Z [err] gyp
2020-02-03T13:32:48.979Z [err]  WARN install got an error, rolling back install
2020-02-03T13:32:48.979Z [err] gyp ERR! configure error 
2020-02-03T13:32:48.979Z [err] gyp ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:32:48.979Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:32:48.979Z [err] gyp ERR! command "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-03T13:32:48.979Z [err] gyp ERR! cwd /opt/lib/node/node-red/node_modules/kerberos
2020-02-03T13:32:48.979Z [err] gyp ERR! node -v v8.16.1
2020-02-03T13:32:48.979Z [err] gyp ERR! node-gyp -v v3.8.0
2020-02-03T13:32:48.979Z [err] gyp ERR! not ok 
2020-02-03T13:32:51.024Z [out] 
2020-02-03T13:32:51.024Z [out] > snappy@5.0.5 install /opt/lib/node/node-red/node_modules/snappy
2020-02-03T13:32:51.024Z [out] > node-gyp rebuild
2020-02-03T13:32:51.024Z [out] 
2020-02-03T13:33:05.532Z [err] gyp
2020-02-03T13:33:05.537Z [err]  
2020-02-03T13:33:05.540Z [err] WARN
2020-02-03T13:33:05.541Z [err]  
2020-02-03T13:33:05.545Z [err] install
2020-02-03T13:33:05.546Z [err]  got an error, rolling back install
2020-02-03T13:33:05.568Z [err] gyp
2020-02-03T13:33:05.571Z [err]  
2020-02-03T13:33:05.572Z [err] ERR!
2020-02-03T13:33:05.576Z [err]  configure error 
2020-02-03T13:33:05.576Z [err] gyp
2020-02-03T13:33:05.581Z [err]  
2020-02-03T13:33:05.585Z [err] ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:33:05.593Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:33:05.596Z [err] gyp
2020-02-03T13:33:05.598Z [err]  
2020-02-03T13:33:05.603Z [err] ERR! command "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-03T13:33:05.603Z [err] gyp ERR! cwd
2020-02-03T13:33:05.605Z [err]  /opt/lib/node/node-red/node_modules/snappy
2020-02-03T13:33:05.607Z [err] gyp
2020-02-03T13:33:05.609Z [err]  
2020-02-03T13:33:05.614Z [err] ERR! node -v v8.16.1
2020-02-03T13:33:05.614Z [err] gyp 
2020-02-03T13:33:05.615Z [err] ERR!
2020-02-03T13:33:05.617Z [err]  
2020-02-03T13:33:05.619Z [err] node-gyp -v
2020-02-03T13:33:05.626Z [err]  v3.8.0
2020-02-03T13:33:05.626Z [err] gyp ERR! not ok 
2020-02-03T13:33:05.751Z [out] 
2020-02-03T13:33:05.751Z [out] > leveldown@1.4.6 install /opt/lib/node/node-red/node_modules/leveldown
2020-02-03T13:33:05.751Z [out] > prebuild --install
2020-02-03T13:33:05.751Z [out] 
2020-02-03T13:33:05.826Z [err] sh: 
2020-02-03T13:33:05.828Z [err] prebuild: not found
2020-02-03T13:33:05.831Z [err] 
2020-02-03T13:33:06.050Z [out] 
2020-02-03T13:33:06.050Z [out] > zmq@2.15.3 install /opt/lib/node/node-red/node_modules/zmq
2020-02-03T13:33:06.050Z [out] > node-gyp rebuild
2020-02-03T13:33:06.050Z [out] 
2020-02-03T13:33:19.978Z [err] gyp
2020-02-03T13:33:19.984Z [err]  
2020-02-03T13:33:19.986Z [err] WARN
2020-02-03T13:33:19.988Z [err]  
2020-02-03T13:33:19.990Z [err] install
2020-02-03T13:33:19.995Z [err]  got an error, rolling back install
2020-02-03T13:33:20.018Z [err] gyp
2020-02-03T13:33:20.020Z [err]  
2020-02-03T13:33:20.022Z [err] ERR!
2020-02-03T13:33:20.025Z [err]  
2020-02-03T13:33:20.026Z [err] configure error
2020-02-03T13:33:20.033Z [err]  
2020-02-03T13:33:20.033Z [err] gyp ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:33:20.043Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:33:20.043Z [err] gyp ERR!
2020-02-03T13:33:20.046Z [err]  
2020-02-03T13:33:20.048Z [err] command
2020-02-03T13:33:20.050Z [err]  "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-03T13:33:20.053Z [err] gyp ERR! 
2020-02-03T13:33:20.055Z [err] cwd
2020-02-03T13:33:20.059Z [err]  /opt/lib/node/node-red/node_modules/zmq
2020-02-03T13:33:20.059Z [err] gyp ERR! node -v
2020-02-03T13:33:20.061Z [err]  v8.16.1
2020-02-03T13:33:20.063Z [err] gyp
2020-02-03T13:33:20.071Z [err]  ERR! node-gyp -v v3.8.0
2020-02-03T13:33:20.071Z [err] gyp ERR! not ok 
2020-02-03T13:34:11.858Z [err] npm
2020-02-03T13:34:11.861Z [err]  
2020-02-03T13:34:11.863Z [err] WARN
2020-02-03T13:34:11.865Z [err]  ws@7.2.1 requires a peer of bufferutil@^4.0.1 but none is installed. You must install peer dependencies yourself.
2020-02-03T13:34:11.869Z [err] npm
2020-02-03T13:34:11.875Z [err]  WARN ws@7.2.1 requires a peer of utf-8-validate@^5.0.2 but none is installed. You must install peer dependencies yourself.
2020-02-03T13:34:11.879Z [err] npm
2020-02-03T13:34:11.881Z [err]  
2020-02-03T13:34:11.882Z [err] WARN
2020-02-03T13:34:11.887Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: fs-ext@0.5.0 (node_modules/fs-ext):
2020-02-03T13:34:11.887Z [err] npm WARN
2020-02-03T13:34:11.889Z [err]  
2020-02-03T13:34:11.891Z [err] optional
2020-02-03T13:34:11.898Z [err]  SKIPPING OPTIONAL DEPENDENCY: fs-ext@0.5.0 install: `node-gyp configure build`
2020-02-03T13:34:11.898Z [err] npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-03T13:34:11.906Z [err] npm 
2020-02-03T13:34:11.908Z [err] WARN
2020-02-03T13:34:11.918Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: snappy@5.0.5 (node_modules/snappy):
2020-02-03T13:34:11.918Z [err] npm WARN 
2020-02-03T13:34:11.923Z [err] optional SKIPPING OPTIONAL DEPENDENCY: snappy@5.0.5 install: `node-gyp rebuild`
2020-02-03T13:34:11.923Z [err] npm WARN optional
2020-02-03T13:34:11.925Z [err]  SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-03T13:34:11.928Z [err] npm
2020-02-03T13:34:11.930Z [err]  
2020-02-03T13:34:11.932Z [err] WARN
2020-02-03T13:34:11.939Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: leveldown@1.4.6 (node_modules/leveldown):
2020-02-03T13:34:11.939Z [err] npm WARN optional SKIPPING OPTIONAL DEPENDENCY: leveldown@1.4.6 install: `prebuild --install`
2020-02-03T13:34:11.939Z [err] npm WARN 
2020-02-03T13:34:11.941Z [err] optional
2020-02-03T13:34:11.943Z [err]  SKIPPING OPTIONAL DEPENDENCY: spawn ENOENT
2020-02-03T13:34:11.946Z [err] npm
2020-02-03T13:34:11.948Z [err]  
2020-02-03T13:34:11.955Z [err] WARN optional SKIPPING OPTIONAL DEPENDENCY: zmq@2.15.3 (node_modules/zmq):
2020-02-03T13:34:11.955Z [err] npm WARN optional SKIPPING OPTIONAL DEPENDENCY: zmq@2.15.3 install: `node-gyp rebuild`
2020-02-03T13:34:11.955Z [err] npm WARN
2020-02-03T13:34:11.957Z [err]  
2020-02-03T13:34:11.959Z [err] optional
2020-02-03T13:34:11.961Z [err]  SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-03T13:34:11.965Z [err] 
2020-02-03T13:34:12.020Z [out] + node-red-contrib-mqtt-broker@0.2.4
2020-02-03T13:34:12.020Z [out] added 211 packages from 282 contributors in 677.636s
2020-02-03T13:34:12.351Z rc=0

желательно этот:

45 минут назад, Lstt сказал:

npm ERR! /opt/root/.npm/_logs/2020-02-03T12_54_06_037Z-debug.log

глянуть )))

Lstt · February 4, 2020

15 часов назад, TheBB сказал:

А почему не в web:

Показать содержимое



-----------------------------------------------------------
2020-02-03T13:22:36.272Z Install : node-red-contrib-mqtt-broker 0.2.4

2020-02-03T13:22:35.958Z npm install --no-audit --no-update-notifier --save --save-prefix="~" --production node-red-contrib-mqtt-broker@0.2.4
2020-02-03T13:24:28.860Z [err] npm
2020-02-03T13:24:28.882Z [err]  WARN deprecated mongodb@2.1.21: Please upgrade to 2.2.19 or higher
2020-02-03T13:24:35.355Z [err] npm
2020-02-03T13:24:35.358Z [err]  
2020-02-03T13:24:35.360Z [err] WARN
2020-02-03T13:24:35.367Z [err]  deprecated node-uuid@1.4.8: Use uuid module instead

-----------------------------------------------------------
2020-02-03T13:31:16.863Z Install : node-red-contrib-mqtt-broker 0.2.4

2020-02-03T13:32:10.360Z [out] 
2020-02-03T13:32:10.360Z [out] > fs-ext@0.5.0 install /opt/lib/node/node-red/node_modules/fs-ext
2020-02-03T13:32:10.360Z [out] > node-gyp configure build
2020-02-03T13:32:10.360Z [out] 
2020-02-03T13:32:31.403Z [err] gyp
2020-02-03T13:32:32.012Z [err]  WARN install got an error, rolling back install
2020-02-03T13:32:32.012Z [err] gyp ERR! configure error 
2020-02-03T13:32:32.012Z [err] gyp ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:32:32.012Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:32:32.012Z [err] gyp ERR! command "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"
2020-02-03T13:32:32.012Z [err] gyp ERR! cwd /opt/lib/node/node-red/node_modules/fs-ext
2020-02-03T13:32:32.012Z [err] gyp ERR! node -v v8.16.1
2020-02-03T13:32:32.012Z [err] gyp ERR! node-gyp -v v3.8.0
2020-02-03T13:32:32.012Z [err] gyp ERR! not ok 
2020-02-03T13:32:33.243Z [out] 
2020-02-03T13:32:33.243Z [out] > kerberos@0.0.24 install /opt/lib/node/node-red/node_modules/kerberos
2020-02-03T13:32:33.243Z [out] > (node-gyp rebuild) || (exit 0)
2020-02-03T13:32:33.243Z [out] 
2020-02-03T13:32:48.976Z [err] gyp
2020-02-03T13:32:48.979Z [err]  WARN install got an error, rolling back install
2020-02-03T13:32:48.979Z [err] gyp ERR! configure error 
2020-02-03T13:32:48.979Z [err] gyp ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:32:48.979Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:32:48.979Z [err] gyp ERR! command "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-03T13:32:48.979Z [err] gyp ERR! cwd /opt/lib/node/node-red/node_modules/kerberos
2020-02-03T13:32:48.979Z [err] gyp ERR! node -v v8.16.1
2020-02-03T13:32:48.979Z [err] gyp ERR! node-gyp -v v3.8.0
2020-02-03T13:32:48.979Z [err] gyp ERR! not ok 
2020-02-03T13:32:51.024Z [out] 
2020-02-03T13:32:51.024Z [out] > snappy@5.0.5 install /opt/lib/node/node-red/node_modules/snappy
2020-02-03T13:32:51.024Z [out] > node-gyp rebuild
2020-02-03T13:32:51.024Z [out] 
2020-02-03T13:33:05.532Z [err] gyp
2020-02-03T13:33:05.537Z [err]  
2020-02-03T13:33:05.540Z [err] WARN
2020-02-03T13:33:05.541Z [err]  
2020-02-03T13:33:05.545Z [err] install
2020-02-03T13:33:05.546Z [err]  got an error, rolling back install
2020-02-03T13:33:05.568Z [err] gyp
2020-02-03T13:33:05.571Z [err]  
2020-02-03T13:33:05.572Z [err] ERR!
2020-02-03T13:33:05.576Z [err]  configure error 
2020-02-03T13:33:05.576Z [err] gyp
2020-02-03T13:33:05.581Z [err]  
2020-02-03T13:33:05.585Z [err] ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:33:05.593Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:33:05.596Z [err] gyp
2020-02-03T13:33:05.598Z [err]  
2020-02-03T13:33:05.603Z [err] ERR! command "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-03T13:33:05.603Z [err] gyp ERR! cwd
2020-02-03T13:33:05.605Z [err]  /opt/lib/node/node-red/node_modules/snappy
2020-02-03T13:33:05.607Z [err] gyp
2020-02-03T13:33:05.609Z [err]  
2020-02-03T13:33:05.614Z [err] ERR! node -v v8.16.1
2020-02-03T13:33:05.614Z [err] gyp 
2020-02-03T13:33:05.615Z [err] ERR!
2020-02-03T13:33:05.617Z [err]  
2020-02-03T13:33:05.619Z [err] node-gyp -v
2020-02-03T13:33:05.626Z [err]  v3.8.0
2020-02-03T13:33:05.626Z [err] gyp ERR! not ok 
2020-02-03T13:33:05.751Z [out] 
2020-02-03T13:33:05.751Z [out] > leveldown@1.4.6 install /opt/lib/node/node-red/node_modules/leveldown
2020-02-03T13:33:05.751Z [out] > prebuild --install
2020-02-03T13:33:05.751Z [out] 
2020-02-03T13:33:05.826Z [err] sh: 
2020-02-03T13:33:05.828Z [err] prebuild: not found
2020-02-03T13:33:05.831Z [err] 
2020-02-03T13:33:06.050Z [out] 
2020-02-03T13:33:06.050Z [out] > zmq@2.15.3 install /opt/lib/node/node-red/node_modules/zmq
2020-02-03T13:33:06.050Z [out] > node-gyp rebuild
2020-02-03T13:33:06.050Z [out] 
2020-02-03T13:33:19.978Z [err] gyp
2020-02-03T13:33:19.984Z [err]  
2020-02-03T13:33:19.986Z [err] WARN
2020-02-03T13:33:19.988Z [err]  
2020-02-03T13:33:19.990Z [err] install
2020-02-03T13:33:19.995Z [err]  got an error, rolling back install
2020-02-03T13:33:20.018Z [err] gyp
2020-02-03T13:33:20.020Z [err]  
2020-02-03T13:33:20.022Z [err] ERR!
2020-02-03T13:33:20.025Z [err]  
2020-02-03T13:33:20.026Z [err] configure error
2020-02-03T13:33:20.033Z [err]  
2020-02-03T13:33:20.033Z [err] gyp ERR! stack Error: EROFS: read-only file system, mkdir '/.node-gyp'
2020-02-03T13:33:20.043Z [err] gyp ERR! System Linux 4.9-ndm-4
2020-02-03T13:33:20.043Z [err] gyp ERR!
2020-02-03T13:33:20.046Z [err]  
2020-02-03T13:33:20.048Z [err] command
2020-02-03T13:33:20.050Z [err]  "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-03T13:33:20.053Z [err] gyp ERR! 
2020-02-03T13:33:20.055Z [err] cwd
2020-02-03T13:33:20.059Z [err]  /opt/lib/node/node-red/node_modules/zmq
2020-02-03T13:33:20.059Z [err] gyp ERR! node -v
2020-02-03T13:33:20.061Z [err]  v8.16.1
2020-02-03T13:33:20.063Z [err] gyp
2020-02-03T13:33:20.071Z [err]  ERR! node-gyp -v v3.8.0
2020-02-03T13:33:20.071Z [err] gyp ERR! not ok 
2020-02-03T13:34:11.858Z [err] npm
2020-02-03T13:34:11.861Z [err]  
2020-02-03T13:34:11.863Z [err] WARN
2020-02-03T13:34:11.865Z [err]  ws@7.2.1 requires a peer of bufferutil@^4.0.1 but none is installed. You must install peer dependencies yourself.
2020-02-03T13:34:11.869Z [err] npm
2020-02-03T13:34:11.875Z [err]  WARN ws@7.2.1 requires a peer of utf-8-validate@^5.0.2 but none is installed. You must install peer dependencies yourself.
2020-02-03T13:34:11.879Z [err] npm
2020-02-03T13:34:11.881Z [err]  
2020-02-03T13:34:11.882Z [err] WARN
2020-02-03T13:34:11.887Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: fs-ext@0.5.0 (node_modules/fs-ext):
2020-02-03T13:34:11.887Z [err] npm WARN
2020-02-03T13:34:11.889Z [err]  
2020-02-03T13:34:11.891Z [err] optional
2020-02-03T13:34:11.898Z [err]  SKIPPING OPTIONAL DEPENDENCY: fs-ext@0.5.0 install: `node-gyp configure build`
2020-02-03T13:34:11.898Z [err] npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-03T13:34:11.906Z [err] npm 
2020-02-03T13:34:11.908Z [err] WARN
2020-02-03T13:34:11.918Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: snappy@5.0.5 (node_modules/snappy):
2020-02-03T13:34:11.918Z [err] npm WARN 
2020-02-03T13:34:11.923Z [err] optional SKIPPING OPTIONAL DEPENDENCY: snappy@5.0.5 install: `node-gyp rebuild`
2020-02-03T13:34:11.923Z [err] npm WARN optional
2020-02-03T13:34:11.925Z [err]  SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-03T13:34:11.928Z [err] npm
2020-02-03T13:34:11.930Z [err]  
2020-02-03T13:34:11.932Z [err] WARN
2020-02-03T13:34:11.939Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: leveldown@1.4.6 (node_modules/leveldown):
2020-02-03T13:34:11.939Z [err] npm WARN optional SKIPPING OPTIONAL DEPENDENCY: leveldown@1.4.6 install: `prebuild --install`
2020-02-03T13:34:11.939Z [err] npm WARN 
2020-02-03T13:34:11.941Z [err] optional
2020-02-03T13:34:11.943Z [err]  SKIPPING OPTIONAL DEPENDENCY: spawn ENOENT
2020-02-03T13:34:11.946Z [err] npm
2020-02-03T13:34:11.948Z [err]  
2020-02-03T13:34:11.955Z [err] WARN optional SKIPPING OPTIONAL DEPENDENCY: zmq@2.15.3 (node_modules/zmq):
2020-02-03T13:34:11.955Z [err] npm WARN optional SKIPPING OPTIONAL DEPENDENCY: zmq@2.15.3 install: `node-gyp rebuild`
2020-02-03T13:34:11.955Z [err] npm WARN
2020-02-03T13:34:11.957Z [err]  
2020-02-03T13:34:11.959Z [err] optional
2020-02-03T13:34:11.961Z [err]  SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-03T13:34:11.965Z [err] 
2020-02-03T13:34:12.020Z [out] + node-red-contrib-mqtt-broker@0.2.4
2020-02-03T13:34:12.020Z [out] added 211 packages from 282 contributors in 677.636s
2020-02-03T13:34:12.351Z rc=0

желательно этот:

глянуть )))

Тут другая проблема - не прав на запись..

Lstt · February 15, 2020

Есть шанс побороть проблему с правами?

TheBB · February 15, 2020

Только что, Lstt сказал:

Есть шанс побороть проблему с правами?

Да. Началось "межсезонье" после синхронизации с owrt... "будем посмотреть". Пример выбрали не самый удачный (mqtt), готовьтесь к нативной компиляции.

Lstt · February 15, 2020

3 минуты назад, TheBB сказал:

Да. Началось "межсезонье" после синхронизации с owrt... "будем посмотреть". Пример выбрали не самый удачный (mqtt), готовьтесь к нативной компиляции.

Ясно..ну честно говоря, в моем личном случае - это именно основное, ради которого и хочется поставить пакеты (основа автоматизации)..

TheBB · February 15, 2020

BusyBox v1.31.1 () built-in shell (ash)

~ # opkg install http://bin.entware.net/mipselsf-k3.4/keenetic/test/node-red_1.0.3-2_mipsel-3.4.ipk
...
~ # 
~ # npm config set editor mcedit -g
~ # npm config set editor mcedit
~ # npm config set cache /opt/root/.npm -g
~ # npm config set cache /opt/root/.npm
~ # 
~ # reboot

редактор по желанию vi/nano/mcedit/... (vi - по умолчанию)

после перезагрузки:

Скрытый текст


-----------------------------------------------------------
2020-02-15T18:58:04.419Z Install : node-red-node-tail 0.1.1

2020-02-15T18:58:03.641Z npm install --no-audit --no-update-notifier --save --save-prefix="~" --production node-red-node-tail@0.1.1
2020-02-15T18:59:31.580Z [err] npm
2020-02-15T18:59:31.583Z [err]  notice created a lockfile as package-lock.json. You should commit this file.
2020-02-15T18:59:31.600Z [out] + node-red-node-tail@0.1.1
2020-02-15T18:59:31.600Z [out] updated 1 package in 75.312s
2020-02-15T18:59:31.663Z rc=0

-----------------------------------------------------------
2020-02-15T19:00:53.404Z Install : node-red-contrib-mqtt-broker 0.2.4

2020-02-15T19:00:52.560Z npm install --no-audit --no-update-notifier --save --save-prefix="~" --production node-red-contrib-mqtt-broker@0.2.4
2020-02-15T19:02:03.315Z [err] npm
2020-02-15T19:02:03.317Z [err]  WARN deprecated mongodb@2.1.21: Please upgrade to 2.2.19 or higher
2020-02-15T19:02:10.012Z [err] npm
2020-02-15T19:02:10.014Z [err]  WARN deprecated
2020-02-15T19:02:10.014Z [err]  node-uuid@1.4.8: Use uuid module instead
2020-02-15T19:05:54.185Z [out] 
2020-02-15T19:05:54.185Z [out] > fs-ext@0.5.0 install /opt/lib/node_modules/node-red/node_modules/fs-ext
2020-02-15T19:05:54.185Z [out] > node-gyp configure build
2020-02-15T19:05:54.185Z [out] 
2020-02-15T19:06:02.028Z [err] gyp
2020-02-15T19:06:02.037Z [err]  
2020-02-15T19:06:02.038Z [err] ERR!
2020-02-15T19:06:02.039Z [err]  configure error
2020-02-15T19:06:02.040Z [err]  
2020-02-15T19:06:02.043Z [err] gyp
2020-02-15T19:06:02.044Z [err]  ERR! 
2020-02-15T19:06:02.045Z [err] stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
2020-02-15T19:06:02.045Z [err] gyp 
2020-02-15T19:06:02.046Z [err] ERR! stack     at PythonFinder.failNoPython (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
2020-02-15T19:06:02.047Z [err] gyp ERR!
2020-02-15T19:06:02.047Z [err]  stack     at PythonFinder.<anonymous> (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
2020-02-15T19:06:02.047Z [err] gyp
2020-02-15T19:06:02.048Z [err]  ERR! stack
2020-02-15T19:06:02.049Z [err]      at F (/opt/lib/node_modules/npm/node_modules/which/which.js:68:16)
2020-02-15T19:06:02.049Z [err] gyp 
2020-02-15T19:06:02.050Z [err] ERR! stack     at E (/opt/lib/node_modules/npm/node_modules/which/which.js:80:29)
2020-02-15T19:06:02.051Z [err] gyp ERR! 
2020-02-15T19:06:02.052Z [err] stack     at /opt/lib/node_modules/npm/node_modules/which/which.js:89:16
2020-02-15T19:06:02.052Z [err] gyp 
2020-02-15T19:06:02.053Z [err] ERR! stack     at /opt/lib/node_modules/npm/node_modules/isexe/index.js:42:5
2020-02-15T19:06:02.054Z [err] gyp ERR!
2020-02-15T19:06:02.055Z [err]  stack     at /opt/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
2020-02-15T19:06:02.055Z [err] gyp
2020-02-15T19:06:02.056Z [err]  ERR! stack
2020-02-15T19:06:02.057Z [err]      at FSReqWrap.oncomplete (fs.js:152:21)
2020-02-15T19:06:02.058Z [err] gyp
2020-02-15T19:06:02.059Z [err]  ERR! System
2020-02-15T19:06:02.060Z [err]  Linux 4.9-ndm-4
2020-02-15T19:06:02.061Z [err] gyp
2020-02-15T19:06:02.062Z [err]  ERR! command
2020-02-15T19:06:02.063Z [err]  "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "build"
2020-02-15T19:06:02.063Z [err] gyp
2020-02-15T19:06:02.064Z [err]  ERR! cwd /opt/lib/node_modules/node-red/node_modules/fs-ext
2020-02-15T19:06:02.065Z [err] gyp 
2020-02-15T19:06:02.066Z [err] ERR! node -v v8.16.1
2020-02-15T19:06:02.067Z [err] gyp ERR!
2020-02-15T19:06:02.068Z [err]  node-gyp -v v3.8.0
2020-02-15T19:06:02.069Z [err] gyp ERR!
2020-02-15T19:06:02.070Z [err]  not ok 
2020-02-15T19:06:02.459Z [out] 
2020-02-15T19:06:02.459Z [out] > kerberos@0.0.24 install /opt/lib/node_modules/node-red/node_modules/kerberos
2020-02-15T19:06:02.459Z [out] > (node-gyp rebuild) || (exit 0)
2020-02-15T19:06:02.459Z [out] 
2020-02-15T19:06:09.524Z [err] gyp
2020-02-15T19:06:09.527Z [err]  
2020-02-15T19:06:09.528Z [err] ERR! 
2020-02-15T19:06:09.529Z [err] configure error 
2020-02-15T19:06:09.533Z [err] gyp
2020-02-15T19:06:09.534Z [err]  ERR! 
2020-02-15T19:06:09.535Z [err] stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
2020-02-15T19:06:09.535Z [err] gyp
2020-02-15T19:06:09.536Z [err]  ERR! stack
2020-02-15T19:06:09.536Z [err]      at PythonFinder.failNoPython (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
2020-02-15T19:06:09.536Z [err] gyp ERR!
2020-02-15T19:06:09.539Z [err]  stack     at PythonFinder.<anonymous> (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
2020-02-15T19:06:09.539Z [err] gyp ERR! stack     at F (/opt/lib/node_modules/npm/node_modules/which/which.js:68:16)
2020-02-15T19:06:09.539Z [err] gyp 
2020-02-15T19:06:09.541Z [err] ERR! stack     at E (/opt/lib/node_modules/npm/node_modules/which/which.js:80:29)
2020-02-15T19:06:09.541Z [err] gyp ERR! 
2020-02-15T19:06:09.542Z [err] stack     at /opt/lib/node_modules/npm/node_modules/which/which.js:89:16
2020-02-15T19:06:09.542Z [err] gyp 
2020-02-15T19:06:09.543Z [err] ERR! stack     at /opt/lib/node_modules/npm/node_modules/isexe/index.js:42:5
2020-02-15T19:06:09.544Z [err] gyp ERR! 
2020-02-15T19:06:09.545Z [err] stack     at /opt/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
2020-02-15T19:06:09.545Z [err] gyp 
2020-02-15T19:06:09.546Z [err] ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)
2020-02-15T19:06:09.548Z [err] gyp
2020-02-15T19:06:09.549Z [err]  ERR! System
2020-02-15T19:06:09.550Z [err]  Linux 4.9-ndm-4
2020-02-15T19:06:09.551Z [err] gyp
2020-02-15T19:06:09.552Z [err]  ERR! command
2020-02-15T19:06:09.553Z [err]  "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-15T19:06:09.554Z [err] gyp ERR! 
2020-02-15T19:06:09.555Z [err] cwd /opt/lib/node_modules/node-red/node_modules/kerberos
2020-02-15T19:06:09.555Z [err] gyp
2020-02-15T19:06:09.556Z [err]  ERR! 
2020-02-15T19:06:09.557Z [err] node -v v8.16.1
2020-02-15T19:06:09.557Z [err] gyp
2020-02-15T19:06:09.558Z [err]  ERR! node-gyp -v
2020-02-15T19:06:09.559Z [err]  v3.8.0
2020-02-15T19:06:09.559Z [err] gyp 
2020-02-15T19:06:09.560Z [err] ERR! not ok 
2020-02-15T19:06:11.010Z [out] 
2020-02-15T19:06:11.010Z [out] > snappy@5.0.5 install /opt/lib/node_modules/node-red/node_modules/snappy
2020-02-15T19:06:11.010Z [out] > node-gyp rebuild
2020-02-15T19:06:11.010Z [out] 
2020-02-15T19:06:17.893Z [err] gyp
2020-02-15T19:06:17.896Z [err]  
2020-02-15T19:06:17.898Z [err] ERR! 
2020-02-15T19:06:17.899Z [err] configure error 
2020-02-15T19:06:17.908Z [err] gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
2020-02-15T19:06:17.908Z [err] gyp ERR! stack     at PythonFinder.failNoPython (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
2020-02-15T19:06:17.908Z [err] gyp ERR!
2020-02-15T19:06:17.910Z [err]  stack     at PythonFinder.<anonymous> (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
2020-02-15T19:06:17.910Z [err] gyp
2020-02-15T19:06:17.911Z [err]  ERR! stack
2020-02-15T19:06:17.912Z [err]      at F (/opt/lib/node_modules/npm/node_modules/which/which.js:68:16)
2020-02-15T19:06:17.912Z [err] gyp 
2020-02-15T19:06:17.913Z [err] ERR! stack     at E (/opt/lib/node_modules/npm/node_modules/which/which.js:80:29)
2020-02-15T19:06:17.914Z [err] gyp ERR!
2020-02-15T19:06:17.915Z [err]  stack     at /opt/lib/node_modules/npm/node_modules/which/which.js:89:16
2020-02-15T19:06:17.915Z [err] gyp
2020-02-15T19:06:17.917Z [err]  ERR! 
2020-02-15T19:06:17.918Z [err] stack     at /opt/lib/node_modules/npm/node_modules/isexe/index.js:42:5
2020-02-15T19:06:17.918Z [err] gyp ERR!
2020-02-15T19:06:17.920Z [err]  stack     at /opt/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
2020-02-15T19:06:17.921Z [err] gyp ERR! 
2020-02-15T19:06:17.922Z [err] stack     at FSReqWrap.oncomplete (fs.js:152:21)
2020-02-15T19:06:17.924Z [err] gyp
2020-02-15T19:06:17.926Z [err]  ERR! System
2020-02-15T19:06:17.927Z [err]  Linux 4.9-ndm-4
2020-02-15T19:06:17.927Z [err] gyp
2020-02-15T19:06:17.927Z [err]  ERR! command
2020-02-15T19:06:17.928Z [err]  "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-15T19:06:17.929Z [err] gyp ERR! 
2020-02-15T19:06:17.930Z [err] cwd /opt/lib/node_modules/node-red/node_modules/snappy
2020-02-15T19:06:17.930Z [err] gyp
2020-02-15T19:06:17.931Z [err]  ERR! 
2020-02-15T19:06:17.932Z [err] node -v v8.16.1
2020-02-15T19:06:17.932Z [err] gyp
2020-02-15T19:06:17.933Z [err]  ERR! node-gyp -v
2020-02-15T19:06:17.935Z [err]  v3.8.0
2020-02-15T19:06:17.935Z [err] gyp ERR!
2020-02-15T19:06:17.936Z [err]  not ok 
2020-02-15T19:06:18.017Z [out] 
2020-02-15T19:06:18.017Z [out] > leveldown@1.4.6 install /opt/lib/node_modules/node-red/node_modules/leveldown
2020-02-15T19:06:18.017Z [out] > prebuild --install
2020-02-15T19:06:18.017Z [out] 
2020-02-15T19:06:18.067Z [err] sh: prebuild: not found
2020-02-15T19:06:18.188Z [out] 
2020-02-15T19:06:18.188Z [out] > zmq@2.15.3 install /opt/lib/node_modules/node-red/node_modules/zmq
2020-02-15T19:06:18.188Z [out] > node-gyp rebuild
2020-02-15T19:06:18.188Z [out] 
2020-02-15T19:06:25.009Z [err] gyp
2020-02-15T19:06:25.013Z [err]  
2020-02-15T19:06:25.014Z [err] ERR! 
2020-02-15T19:06:25.015Z [err] configure error 
2020-02-15T19:06:25.019Z [err] gyp
2020-02-15T19:06:25.021Z [err]  ERR! 
2020-02-15T19:06:25.022Z [err] stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
2020-02-15T19:06:25.022Z [err] gyp 
2020-02-15T19:06:25.023Z [err] ERR! stack     at PythonFinder.failNoPython (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:484:19)
2020-02-15T19:06:25.024Z [err] gyp ERR!
2020-02-15T19:06:25.025Z [err]  stack     at PythonFinder.<anonymous> (/opt/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:406:16)
2020-02-15T19:06:25.027Z [err] gyp ERR! 
2020-02-15T19:06:25.028Z [err] stack     at F (/opt/lib/node_modules/npm/node_modules/which/which.js:68:16)
2020-02-15T19:06:25.028Z [err] gyp
2020-02-15T19:06:25.029Z [err]  ERR! stack
2020-02-15T19:06:25.030Z [err]      at E (/opt/lib/node_modules/npm/node_modules/which/which.js:80:29)
2020-02-15T19:06:25.030Z [err] gyp 
2020-02-15T19:06:25.031Z [err] ERR! stack     at /opt/lib/node_modules/npm/node_modules/which/which.js:89:16
2020-02-15T19:06:25.033Z [err] gyp ERR! 
2020-02-15T19:06:25.034Z [err] stack     at /opt/lib/node_modules/npm/node_modules/isexe/index.js:42:5
2020-02-15T19:06:25.034Z [err] gyp
2020-02-15T19:06:25.035Z [err]  ERR! 
2020-02-15T19:06:25.036Z [err] stack     at /opt/lib/node_modules/npm/node_modules/isexe/mode.js:8:5
2020-02-15T19:06:25.036Z [err] gyp 
2020-02-15T19:06:25.037Z [err] ERR! stack
2020-02-15T19:06:25.038Z [err]      at FSReqWrap.oncomplete (fs.js:152:21)
2020-02-15T19:06:25.039Z [err] gyp
2020-02-15T19:06:25.040Z [err]  ERR! System
2020-02-15T19:06:25.041Z [err]  Linux 4.9-ndm-4
2020-02-15T19:06:25.042Z [err] gyp
2020-02-15T19:06:25.043Z [err]  ERR! command
2020-02-15T19:06:25.044Z [err]  "/opt/bin/node" "/opt/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
2020-02-15T19:06:25.045Z [err] gyp ERR! 
2020-02-15T19:06:25.046Z [err] cwd /opt/lib/node_modules/node-red/node_modules/zmq
2020-02-15T19:06:25.047Z [err] gyp ERR! 
2020-02-15T19:06:25.048Z [err] node -v v8.16.1
2020-02-15T19:06:25.048Z [err] gyp
2020-02-15T19:06:25.048Z [err]  ERR! node-gyp -v
2020-02-15T19:06:25.049Z [err]  v3.8.0
2020-02-15T19:06:25.049Z [err] gyp
2020-02-15T19:06:25.050Z [err]  ERR! not ok
2020-02-15T19:06:25.051Z [err]  
2020-02-15T19:06:57.218Z [err] npm
2020-02-15T19:06:57.219Z [err]  WARN 
2020-02-15T19:06:57.221Z [err] optional SKIPPING OPTIONAL DEPENDENCY: fs-ext@0.5.0 (node_modules/fs-ext):
2020-02-15T19:06:57.221Z [err] npm
2020-02-15T19:06:57.222Z [err]  WARN 
2020-02-15T19:06:57.223Z [err] optional SKIPPING OPTIONAL DEPENDENCY: fs-ext@0.5.0 install: `node-gyp configure build`
2020-02-15T19:06:57.223Z [err] npm
2020-02-15T19:06:57.224Z [err]  WARN 
2020-02-15T19:06:57.226Z [err] optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-15T19:06:57.228Z [err] npm
2020-02-15T19:06:57.229Z [err]  WARN 
2020-02-15T19:06:57.230Z [err] optional SKIPPING OPTIONAL DEPENDENCY: snappy@5.0.5 (node_modules/snappy):
2020-02-15T19:06:57.231Z [err] npm WARN
2020-02-15T19:06:57.232Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: snappy@5.0.5 install: `node-gyp rebuild`
2020-02-15T19:06:57.234Z [err] npm WARN
2020-02-15T19:06:57.235Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-15T19:06:57.237Z [err] npm
2020-02-15T19:06:57.238Z [err]  WARN optional
2020-02-15T19:06:57.239Z [err]  SKIPPING OPTIONAL DEPENDENCY: leveldown@1.4.6 (node_modules/leveldown):
2020-02-15T19:06:57.239Z [err] npm 
2020-02-15T19:06:57.242Z [err] WARN optional SKIPPING OPTIONAL DEPENDENCY: leveldown@1.4.6 install: `prebuild --install`
2020-02-15T19:06:57.242Z [err] npm WARN 
2020-02-15T19:06:57.243Z [err] optional SKIPPING OPTIONAL DEPENDENCY: spawn ENOENT
2020-02-15T19:06:57.244Z [err] npm 
2020-02-15T19:06:57.244Z [err] WARN optional
2020-02-15T19:06:57.246Z [err]  SKIPPING OPTIONAL DEPENDENCY: zmq@2.15.3 (node_modules/zmq):
2020-02-15T19:06:57.246Z [err] npm 
2020-02-15T19:06:57.247Z [err] WARN optional SKIPPING OPTIONAL DEPENDENCY: zmq@2.15.3 install: `node-gyp rebuild`
2020-02-15T19:06:57.247Z [err] npm WARN
2020-02-15T19:06:57.248Z [err]  optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1
2020-02-15T19:06:57.250Z [err] 
2020-02-15T19:06:57.287Z [out] + node-red-contrib-mqtt-broker@0.2.4
2020-02-15T19:06:57.287Z [out] added 211 packages from 282 contributors in 352.917s
2020-02-15T19:06:57.382Z rc=0

TheBB · February 16, 2020

opkg install bash binutils cmake gawk gcc git make python sed

wget -qO- http://bin.entware.net/mipselsf-k3.4/include/include.tar.gz | tar xzv -C /opt/include

echo 'export CC="gcc"' >> /opt/etc/profile 
echo 'export CXX="g++"' >> /opt/etc/profile 
echo 'export CFLAGS="-O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float "' >> /opt/etc/profile 
echo 'export CXXFLAGS="-O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float "' >> /opt/etc/profile 
echo 'export CPPFLAGS="-I/opt/include"' >> /opt/etc/profile 
echo 'export LDFLAGS="-Wl,-rpath=/opt/lib -Wl,--dynamic-linker=/opt/lib/ld.so.1 -L/opt/lib"' >> /opt/etc/profile

`mcedit /opt/etc/init.d/S99node-red` немного подправим

Цитата

#!/bin/sh

. /opt/etc/profile

export HOME="/opt/root"
export PWD="/opt"
export SHELL="/opt/bin/bash"

LOG=/opt/var/log/node-red.log

...

было

Скрытый текст

Цитата

...

Фев 16 15:41:05

ndm

Opkg::Manager: /opt/etc/init.d/rc.unslung: timezone=Europe/Moscow USER=root LD_LIBRARY_PATH= SHLVL=2 HOME=/ NDM_MOUNT_ROOT=/tmp/mnt LD_BIND_NOW=1 TERM=linux PATH=/opt/sbin:/opt/bin:/opt/usr/sbin:/opt/usr/bin:/usr/sbin:/usr/bin:/sbin:/bin LANG=UTF-8 SHELL=/bin/sh PWD=/.

Фев 16 15:41:05

ndm

Opkg::Manager: /opt/etc/init.d/rc.unslung: HOME='/' HOSTNAME='KUII' IFS=' ' LANG='UTF-8' LD_BIND_NOW='1' LD_LIBRARY_PATH='' LINENO='' NDM_MOUNT_ROOT='/tmp/mnt' OPTIND='1' PATH='/opt/sbin:/opt/bin:/opt/usr/sbin:/opt/usr/bin:/usr/sbin:/usr/bin:/sbin:/bin' PPID='20130' PS1='\w \$ ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/sh' SHLVL='2' TERM='linux' USER='root' timezone='Europe/Moscow'.

...

стало

Скрытый текст

Цитата

...

Фев 16 15:41:05

ndm

Opkg::Manager: /opt/etc/init.d/rc.unslung: timezone=Europe/Moscow USER=root CXXFLAGS=-O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float LD_LIBRARY_PATH= SHLVL=2 HOME=/opt/root TERMINFO=/opt/share/terminfo NDM_MOUNT_ROOT=/tmp/mnt LDFLAGS=-Wl,-rpath=/opt/lib -Wl,--dynamic-linker=/opt/lib/ld.so.1 -L/opt/lib LD_BIND_NOW=1 TEMP=/opt/tmp TERM=xterm PATH=/opt/sbin:/opt/bin:/opt/usr/sbin:/opt/usr/bin:/usr/sbin:/usr/bin:/sbin:/bin CFLAGS=-O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float LANG=en_US.UTF-8 TMP=/opt/tmp CPPFLAGS=-I/opt/include SHELL=/opt/bin/bash CXX=g++ PWD=/opt LC_ALL= CC=gcc.

Фев 16 15:41:05

ndm

Opkg::Manager: /opt/etc/init.d/rc.unslung: CC='gcc' CFLAGS='-O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float ' CPPFLAGS='-I/opt/include' CXX='g++' CXXFLAGS='-O2 -pipe -mno-branch-likely -mips32r2 -mtune=mips32r2 -fno-caller-saves -msoft-float ' HOME='/opt/root' HOSTNAME='KUII' IFS=' ' LANG='en_US.UTF-8' LC_ALL='' LDFLAGS='-Wl,-rpath=/opt/lib -Wl,--dynamic-linker=/opt/lib/ld.so.1 -L/opt/lib' LD_BIND_NOW='1' LD_LIBRARY_PATH='' LINENO='' NDM_MOUNT_ROOT='/tmp/mnt' OPTIND='1' PATH='/opt/sbin:/opt/bin:/opt/usr/sbin:/opt/usr/bin:/usr/sbin:/usr/bin:/sbin:/bin' PPID='20130' PS1='\w \$ ' PS2='> ' PS4='+ ' PWD='/opt' SHELL='/opt/bin/bash' SHLVL='2' TEMP='/opt/tmp' TERM='xterm' TERMINFO='/opt/share/terminfo' TMP='/opt/tmp' USER='root' timezone='Europe/Moscow'.

...

Edited February 16, 2020 by TheBB

Lstt · February 18, 2020

Если соблюдать описанную Вами последовательность, то да, всё работает. Проверено на Omni и Extra! Спасибо огромное! Установка различных нодов, длится, конечно не мало 5-20 минут..

P.S. - не обновляйте npm до крайней версии - NodeRed работает некорректно!

Edited February 18, 2020 by Lstt

Sign In

умный дом Попытка установки Node-RED (Графический конфигуратор для интернета вещей)

Recommended Posts

Link to comment

Share on other sites

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

TheBB

TheBB

TheBB

Posted Images

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation

Recently Browsing 0 members