Jump to content
  • 0
vasek00

11дней работы роутера и отказ HP P1102 печатать на 11день

Question

Релиз 3.1.6 подключен принтер HP LaserJet Professional P1102 ( по принтеру с утра его вкл. и печатают, вечером уходят выкл.) 11 дней работы были без нареканий на 11день принтер отказался печатать хотя был виден в WEB роутера.

Скрытый текст

printer 03f0:002a
    name "HP LaserJet Professional P1102"
    type cifs
    port 9100
    debug


...
[I] Oct 23 08:57:14 ndm: kernel: usb 1-2: new high-speed USB device number 14 using xhci-mtk
[I] Oct 23 08:57:14 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 23 08:57:14 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 23 08:57:14 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 23 08:57:14 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 23 08:57:14 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....I1c
[I] Oct 23 08:57:14 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 23 08:57:14 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 23 08:57:15 ndm: kernel: usb 1-2: USB disconnect, device number 14
[I] Oct 23 08:57:16 ndm: kernel: usb 1-2: new high-speed USB device number 15 using xhci-mtk
[I] Oct 23 08:57:17 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 23 08:57:17 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 23 08:57:17 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 23 08:57:17 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 23 08:57:17 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....R1a
[I] Oct 23 08:57:17 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 23 08:57:17 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.
[E] Oct 23 09:32:39 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 23 11:00:03 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 23 11:49:18 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 23 15:04:55 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[W] Oct 23 17:02:52 ndm: kernel: usblp0: nonzero read bulk status received: -71
[I] Oct 23 17:02:52 ndm: kernel: usb 1-2: USB disconnect, device number 15
[I] Oct 23 17:02:52 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.

[I] Oct 24 08:53:18 ndm: kernel: usb 1-2: new high-speed USB device number 16 using xhci-mtk
[I] Oct 24 08:53:19 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 24 08:53:19 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 24 08:53:19 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 24 08:53:19 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 24 08:53:19 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...I1c
[I] Oct 24 08:53:19 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 24 08:53:19 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: reset high-speed USB device number 16 using xhci-mtk
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: device firmware changed
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: USB disconnect, device number 16
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: new high-speed USB device number 17 using xhci-mtk
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 24 08:53:22 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 24 08:53:23 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...R1a
[I] Oct 24 08:53:23 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 24 08:53:23 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Oct 24 16:57:26 ndm: kernel: usblp0: nonzero read bulk status received: -71
[I] Oct 24 16:57:26 ndm: kernel: usb 1-2: USB disconnect, device number 17
[I] Oct 24 16:57:26 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.

[I] Oct 25 09:14:52 ndm: kernel: usb 1-2: new high-speed USB device number 18 using xhci-mtk
[I] Oct 25 09:14:53 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 25 09:14:53 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 25 09:14:53 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 25 09:14:53 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 25 09:14:53 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...I1c
[I] Oct 25 09:14:53 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 25 09:14:53 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 25 09:14:56 ndm: kernel: usb 1-2: reset high-speed USB device number 18 using xhci-mtk
[I] Oct 25 09:14:56 ndm: kernel: usb 1-2: device firmware changed
[I] Oct 25 09:14:56 ndm: kernel: usb 1-2: USB disconnect, device number 18
[I] Oct 25 09:14:56 ndm: kernel: usb 1-2: new high-speed USB device number 19 using xhci-mtk
[I] Oct 25 09:14:56 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 25 09:14:56 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 25 09:14:57 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 25 09:14:57 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 25 09:14:57 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...R1a
[I] Oct 25 09:14:57 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 19 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 25 09:14:57 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[I] Oct 25 16:47:33 ndm: kernel: usb 1-2: USB disconnect, device number 19
[W] Oct 25 16:47:33 ndm: kernel: usblp0: nonzero read bulk status received: -143
[I] Oct 25 16:47:33 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[I] Oct 25 16:47:53 ndm: kernel: usb 1-2: new high-speed USB device number 20 using xhci-mtk
[I] Oct 25 16:47:53 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 25 16:47:53 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 25 16:47:53 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 25 16:47:53 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 25 16:47:53 ndm: kernel: usb 1-2: SerialNumber: 000000000Q892....I1c
[I] Oct 25 16:47:53 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 25 16:47:53 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 25 16:47:56 ndm: kernel: usb 1-2: reset high-speed USB device number 20 using xhci-mtk
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: device firmware changed
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: USB disconnect, device number 20
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: new high-speed USB device number 21 using xhci-mtk
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 25 16:47:57 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....R1a
[I] Oct 25 16:47:57 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A

[E] Oct 25 20:11:56 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[I] Oct 25 21:16:29 ndm: kernel: usb 1-2: USB disconnect, device number 21
[W] Oct 25 21:16:29 ndm: kernel: usblp0: nonzero read bulk status received: -143
[I] Oct 25 21:16:29 ndm: kernel: usblp0: removed
[I] Oct 25 21:16:29 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[E] Oct 25 21:32:21 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 26 01:07:18 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 26 08:33:22 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 26 12:52:05 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 26 20:39:53 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 26 22:13:57 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 26 23:17:12 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 27 06:03:32 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 27 06:42:00 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 27 09:15:38 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 27 20:46:03 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 27 23:24:34 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[I] Oct 28 08:47:20 ndm: kernel: usb 1-2: new high-speed USB device number 22 using xhci-mtk
[I] Oct 28 08:47:20 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 28 08:47:20 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 28 08:47:20 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 28 08:47:20 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 28 08:47:20 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...I1c
[I] Oct 28 08:47:20 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 28 08:47:20 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 28 08:47:22 ndm: kernel: usb 1-2: USB disconnect, device number 22
[I] Oct 28 08:47:23 ndm: kernel: usb 1-2: new high-speed USB device number 23 using xhci-mtk
[I] Oct 28 08:47:23 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 28 08:47:23 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 28 08:47:23 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 28 08:47:23 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 28 08:47:23 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...R1a
[I] Oct 28 08:47:23 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 23 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 28 08:47:23 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[I] Oct 28 21:43:06 ndm: kernel: usb 1-2: USB disconnect, device number 23
[W] Oct 28 21:43:06 ndm: kernel: usblp0: nonzero read bulk status received: -143
[I] Oct 28 21:43:06 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.

[E] Oct 29 00:56:19 ndm: Io::UdpSocket: unable to write data: operation not permitted.
[E] Oct 29 01:34:34 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 29 05:24:24 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[E] Oct 29 07:16:58 ndm: Io::UdpSocket: unable to write data: operation not permitted.

[I] Oct 29 08:06:08 ndm: kernel: usb 1-2: new high-speed USB device number 24 using xhci-mtk
[I] Oct 29 08:06:08 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 08:06:08 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 08:06:08 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 08:06:08 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 08:06:08 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...I1c
[I] Oct 29 08:06:08 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 29 08:06:08 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 29 08:06:09 ndm: kernel: usb 1-2: USB disconnect, device number 24
[I] Oct 29 08:06:10 ndm: kernel: usb 1-2: new high-speed USB device number 25 using xhci-mtk
[I] Oct 29 08:06:10 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 08:06:10 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 08:06:10 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 08:06:10 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 08:06:10 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....R1a
[I] Oct 29 08:06:10 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 25 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 29 08:06:10 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Oct 29 11:05:27 ndm: kernel: usblp0: nonzero read bulk status received: -71
[I] Oct 29 11:05:27 ndm: kernel: usb 1-2: USB disconnect, device number 25
[I] Oct 29 11:05:27 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[I] Oct 29 11:05:45 ndm: kernel: usb 1-2: new high-speed USB device number 26 using xhci-mtk
[I] Oct 29 11:05:45 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:05:45 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:05:45 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:05:45 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:05:45 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....I1c
[I] Oct 29 11:05:45 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 29 11:05:45 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 29 11:05:46 ndm: kernel: usb 1-2: USB disconnect, device number 26
[I] Oct 29 11:05:47 ndm: kernel: usb 1-2: new high-speed USB device number 27 using xhci-mtk
[I] Oct 29 11:05:47 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:05:47 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:05:47 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:05:47 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:05:47 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....R1a
[I] Oct 29 11:05:47 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 27 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 29 11:05:47 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.
[I] Oct 29 11:09:02 ndm: kernel: usb 1-2: USB disconnect, device number 27
[W] Oct 29 11:09:02 ndm: kernel: usblp0: nonzero read bulk status received: -143
[I] Oct 29 11:09:03 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[I] Oct 29 11:09:22 ndm: kernel: usb 1-2: new high-speed USB device number 28 using xhci-mtk
[I] Oct 29 11:09:22 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:09:22 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:09:22 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:09:22 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:09:22 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....I1c
[I] Oct 29 11:09:22 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 29 11:09:22 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 29 11:09:25 ndm: kernel: usb 1-2: reset high-speed USB device number 28 using xhci-mtk
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: device firmware changed
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: USB disconnect, device number 28
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: new high-speed USB device number 29 using xhci-mtk
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:09:26 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...R1a
[I] Oct 29 11:09:26 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 29 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 29 11:09:26 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Oct 29 11:10:10 ndm: kernel: usblp0: nonzero read bulk status received: -71
[I] Oct 29 11:10:10 ndm: kernel: usb 1-2: USB disconnect, device number 29
[I] Oct 29 11:10:10 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[I] Oct 29 11:10:31 ndm: kernel: usb 1-2: new high-speed USB device number 30 using xhci-mtk
[I] Oct 29 11:10:31 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:10:31 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:10:31 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:10:31 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:10:31 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...I1c
[I] Oct 29 11:10:31 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 29 11:10:31 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: reset high-speed USB device number 30 using xhci-mtk
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: device firmware changed
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: USB disconnect, device number 30
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: new high-speed USB device number 31 using xhci-mtk
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:10:35 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....R1a
[I] Oct 29 11:10:35 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 31 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 29 11:10:35 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.
[W] Oct 29 11:14:18 ndm: kernel: usblp0: nonzero read bulk status received: -71
[I] Oct 29 11:14:18 ndm: kernel: usb 1-2: USB disconnect, device number 31
[I] Oct 29 11:14:18 ndm: kernel: usblp0: removed
[I] Oct 29 11:14:18 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[I] Oct 29 11:16:40 ndm: kernel: usb 1-2: new high-speed USB device number 32 using xhci-mtk
[I] Oct 29 11:16:40 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:16:40 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:16:40 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:16:40 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:16:40 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...I1c
[I] Oct 29 11:16:40 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Oct 29 11:16:40 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Oct 29 11:16:41 ndm: kernel: usb 1-2: USB disconnect, device number 32
[I] Oct 29 11:16:43 ndm: kernel: usb 1-2: new high-speed USB device number 33 using xhci-mtk
[I] Oct 29 11:16:43 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Oct 29 11:16:43 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Oct 29 11:16:43 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Oct 29 11:16:43 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Oct 29 11:16:43 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....R1a
[I] Oct 29 11:16:43 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Oct 29 11:16:43 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

Перестал печатать

 

 

Edited by vasek00

Share this post


Link to post
Share on other sites

11 answers to this question

Recommended Posts

  • 0

Релиз 3.1.10.

Данная ситуация повторилась на 12 день, до этого без нарекания, принтер отказался печать по тем же признакам.

Скрытый текст

Начало 12 рабочего дня данного роутера, включение и работа

[I] Nov 11 09:09:28 ndm: kernel: usb 1-2: new high-speed USB device number 32 using xhci-mtk
[I] Nov 11 09:09:28 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Nov 11 09:09:28 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Nov 11 09:09:28 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Nov 11 09:09:28 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Nov 11 09:09:28 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89.....1c
[I] Nov 11 09:09:28 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Nov 11 09:09:28 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Nov 11 09:09:29 ndm: kernel: usb 1-2: USB disconnect, device number 32

[I] Nov 11 09:09:31 ndm: kernel: usb 1-2: new high-speed USB device number 33 using xhci-mtk
[I] Nov 11 09:09:31 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Nov 11 09:09:31 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Nov 11 09:09:31 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Nov 11 09:09:31 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Nov 11 09:09:31 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89.....1a
[I] Nov 11 09:09:31 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 33 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Nov 11 09:09:31 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Nov 11 09:58:27 ndm: kernel: usblp0: nonzero read bulk status received: -71
[I] Nov 11 09:58:27 ndm: kernel: usb 1-2: USB disconnect, device number 33
[I] Nov 11 09:58:27 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[I] Nov 11 09:58:45 ndm: kernel: usb 1-2: new high-speed USB device number 34 using xhci-mtk
[I] Nov 11 09:58:45 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Nov 11 09:58:45 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Nov 11 09:58:45 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Nov 11 09:58:45 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Nov 11 09:58:45 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89.....1c
[I] Nov 11 09:58:45 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Nov 11 09:58:45 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Nov 11 09:58:48 ndm: kernel: usb 1-2: reset high-speed USB device number 34 using xhci-mtk
[I] Nov 11 09:58:48 ndm: kernel: usb 1-2: device firmware changed
[I] Nov 11 09:58:48 ndm: kernel: usb 1-2: USB disconnect, device number 34
[I] Nov 11 09:58:49 ndm: kernel: usb 1-2: new high-speed USB device number 35 using xhci-mtk
[I] Nov 11 09:58:49 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Nov 11 09:58:49 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Nov 11 09:58:49 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Nov 11 09:58:49 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Nov 11 09:58:49 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...1a
[I] Nov 11 09:58:49 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 35 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Nov 11 09:58:49 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.
[W] Nov 11 10:01:18 ndm: kernel: usblp0: nonzero read bulk status received: -71
[I] Nov 11 10:01:18 ndm: kernel: usb 1-2: USB disconnect, device number 35
[I] Nov 11 10:01:18 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
[I] Nov 11 10:01:36 ndm: kernel: usb 1-2: new high-speed USB device number 36 using xhci-mtk
[I] Nov 11 10:01:36 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Nov 11 10:01:36 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Nov 11 10:01:36 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Nov 11 10:01:36 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Nov 11 10:01:36 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89....1c
[I] Nov 11 10:01:36 ndm: kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
[I] Nov 11 10:01:36 ndm: kernel: scsi host0: usb-storage 1-2:1.0
[I] Nov 11 10:01:37 ndm: kernel: usb 1-2: USB disconnect, device number 36
[I] Nov 11 10:01:38 ndm: kernel: usb 1-2: new high-speed USB device number 37 using xhci-mtk
[I] Nov 11 10:01:39 ndm: kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
[I] Nov 11 10:01:39 ndm: kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Nov 11 10:01:39 ndm: kernel: usb 1-2: Product: HP LaserJet Professional P1102
[I] Nov 11 10:01:39 ndm: kernel: usb 1-2: Manufacturer: Hewlett-Packard
[I] Nov 11 10:01:39 ndm: kernel: usb 1-2: SerialNumber: 000000000Q89...1a
[I] Nov 11 10:01:39 ndm: kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 37 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
[I] Nov 11 10:01:39 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

По WEB он активен

 

Edited by vasek00

Share this post


Link to post
Share on other sites
  • 0

При мне был отловлен два раза "зависон" принтера ( P1102 ) на Win7 32bit - принтер выдавал ошибку ( горел светодиод "!" ) Итак в Word открывался 5 страничный документ и выводился на печать ( активным выбран принтер на KN10 )  - двух страничная печать. При повторном выводе в окне Word было сообщение - ошибка в очереди. Второй раз этот же файл но было выбрано печать страницы 1, 3 - и опять аналогична ошибка и так же "ошибка очереди".

Придется посмотреть настройки Win для печати.

Share this post


Link to post
Share on other sites
  • 0

Возвращаясь к данной проблеме и ее периода - можно считать не решаемой. Сейчас релиз 3.3.2 и подвижек в решении нет.

Повторюсь данный принтер подключенный к USB порту принтера "HP LaserJet Professional P1102" через определенное время работы отказывается печатать, помогает только перезагрузка роутера. На принтере печатают с 08-00 до 17-30.

Скрытый текст

Jan 17 16:06:36 upnp: Listening for NAT-PMP/PCP traffic on port 5351
Jan 17 16:06:36 kernel: usb 1-2: new high-speed USB device number 3 using xhci-mtk
Jan 17 16:06:36 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 17 16:06:36 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 17 16:06:36 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 17 16:06:36 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 17 16:06:36 kernel: usb 1-2: SerialNumber: ................................PR1a
Jan 17 16:06:36 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 17 16:06:36 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Jan 17 16:31:40 kernel: usblp0: nonzero read bulk status received: -71
Jan 17 16:31:40 kernel: usb 1-2: USB disconnect, device number 3
Jan 17 16:31:40 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
Jan 17 16:32:11 kernel: usb 1-2: new high-speed USB device number 4 using xhci-mtk
Jan 17 16:32:11 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 17 16:32:11 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 17 16:32:11 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 17 16:32:11 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 17 16:32:11 kernel: usb 1-2: SerialNumber: ...............................SI1c
Jan 17 16:32:11 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 17 16:32:11 kernel: scsi host0: usb-storage 1-2:1.0
Jan 17 16:32:14 kernel: usb 1-2: reset high-speed USB device number 4 using xhci-mtk
Jan 17 16:32:14 kernel: usb 1-2: device firmware changed
Jan 17 16:32:14 kernel: usb 1-2: USB disconnect, device number 4
Jan 17 16:32:14 kernel: usb 1-2: new high-speed USB device number 5 using xhci-mtk
Jan 17 16:32:15 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 17 16:32:15 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 17 16:32:15 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 17 16:32:15 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 17 16:32:15 kernel: usb 1-2: SerialNumber: ..................PR1a
Jan 17 16:32:15 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 17 16:32:15 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Jan 17 21:00:46 kernel: usblp0: nonzero read bulk status received: -71
Jan 17 21:00:46 kernel: usb 1-2: USB disconnect, device number 5
Jan 17 21:00:46 kernel: usblp0: removed
Jan 17 21:00:46 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.


Jan 20 08:59:00 kernel: usb 1-2: new high-speed USB device number 6 using xhci-mtk
Jan 20 08:59:00 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 20 08:59:00 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 20 08:59:00 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 20 08:59:00 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 20 08:59:00 kernel: usb 1-2: SerialNumber: .................................SI1c
Jan 20 08:59:00 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 20 08:59:00 kernel: scsi host0: usb-storage 1-2:1.0
Jan 20 08:59:03 kernel: usb 1-2: reset high-speed USB device number 6 using xhci-mtk
Jan 20 08:59:03 kernel: usb 1-2: device firmware changed
Jan 20 08:59:03 kernel: usb 1-2: USB disconnect, device number 6
Jan 20 08:59:04 kernel: usb 1-2: new high-speed USB device number 7 using xhci-mtk
Jan 20 08:59:04 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 20 08:59:04 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 20 08:59:04 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 20 08:59:04 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 20 08:59:04 kernel: usb 1-2: SerialNumber: ...............................PR1a
Jan 20 08:59:04 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 20 08:59:04 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Jan 20 17:02:06 kernel: usblp0: nonzero read bulk status received: -71
Jan 20 17:02:06 kernel: usb 1-2: USB disconnect, device number 7
Jan 20 17:02:06 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.

Jan 21 08:30:53 kernel: usb 1-2: new high-speed USB device number 8 using xhci-mtk
Jan 21 08:30:53 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 21 08:30:53 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 21 08:30:53 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 21 08:30:53 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 21 08:30:53 kernel: usb 1-2: SerialNumber: ................................SI1c
Jan 21 08:30:53 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 21 08:30:53 kernel: scsi host0: usb-storage 1-2:1.0
Jan 21 08:30:54 kernel: usb 1-2: USB disconnect, device number 8
Jan 21 08:30:55 kernel: usb 1-2: new high-speed USB device number 9 using xhci-mtk
Jan 21 08:30:56 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 21 08:30:56 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 21 08:30:56 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 21 08:30:56 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 21 08:30:56 kernel: usb 1-2: SerialNumber: ..................................PR1a
Jan 21 08:30:56 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 21 08:30:56 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Jan 21 08:50:30 kernel: usblp0: nonzero read bulk status received: -71
Jan 21 08:50:30 kernel: usb 1-2: USB disconnect, device number 9
Jan 21 08:50:30 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
Jan 21 08:50:51 kernel: usb 1-2: new high-speed USB device number 10 using xhci-mtk
Jan 21 08:50:51 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 21 08:50:51 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 21 08:50:51 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 21 08:50:51 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 21 08:50:51 kernel: usb 1-2: SerialNumber: .................................SI1c
Jan 21 08:50:51 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 21 08:50:51 kernel: scsi host0: usb-storage 1-2:1.0
Jan 21 08:50:53 kernel: usb 1-2: USB disconnect, device number 10
Jan 21 08:50:53 kernel: usb 1-2: new high-speed USB device number 11 using xhci-mtk
Jan 21 08:50:54 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 21 08:50:54 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 21 08:50:54 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 21 08:50:54 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 21 08:50:54 kernel: usb 1-2: SerialNumber: ...................................PR1a
Jan 21 08:50:54 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 21 08:50:54 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

Jan 22 09:02:04 kernel: usb 1-2: new high-speed USB device number 12 using xhci-mtk
Jan 22 09:02:04 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 22 09:02:04 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 22 09:02:04 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 22 09:02:04 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 22 09:02:04 kernel: usb 1-2: SerialNumber: .................................SI1c
Jan 22 09:02:04 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 22 09:02:04 kernel: scsi host0: usb-storage 1-2:1.0
Jan 22 09:02:05 kernel: usb 1-2: USB disconnect, device number 12
Jan 22 09:02:06 kernel: usb 1-2: new high-speed USB device number 13 using xhci-mtk
Jan 22 09:02:07 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 22 09:02:07 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 22 09:02:07 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 22 09:02:07 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 22 09:02:07 kernel: usb 1-2: SerialNumber: ...................................PR1a
Jan 22 09:02:07 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 22 09:02:07 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

[W] Jan 22 16:58:46 kernel: usblp0: nonzero read bulk status received: -71
Jan 22 16:58:46 kernel: usb 1-2: USB disconnect, device number 13
Jan 22 16:58:46 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.

Jan 23 08:53:11 kernel: usb 1-2: new high-speed USB device number 14 using xhci-mtk
Jan 23 08:53:11 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 23 08:53:11 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 23 08:53:11 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 23 08:53:11 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 23 08:53:11 kernel: usb 1-2: SerialNumber: ....................................SI1c
Jan 23 08:53:11 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 23 08:53:11 kernel: scsi host0: usb-storage 1-2:1.0
Jan 23 08:53:12 kernel: usb 1-2: USB disconnect, device number 14
Jan 23 08:53:13 kernel: usb 1-2: new high-speed USB device number 15 using xhci-mtk
Jan 23 08:53:14 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 23 08:53:14 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 23 08:53:14 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 23 08:53:14 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 23 08:53:14 kernel: usb 1-2: SerialNumber: ..............................PR1a
Jan 23 08:53:14 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 23 08:53:14 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.

Jan 23 13:30:33 kernel: usb 1-2: USB disconnect, device number 15
Jan 23 13:30:33 kernel: usblp0: removed
[E] Jan 23 13:30:33 ndm: Cifs::ServerTsmb: tsmb-cfg: "Failed to connect to remote queue (port 7004): Connection refused".
Jan 23 13:30:33 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
Jan 23 13:30:50 kernel: usb 1-2: new high-speed USB device number 16 using xhci-mtk
Jan 23 13:30:51 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 23 13:30:51 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 23 13:30:51 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 23 13:30:51 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 23 13:30:51 kernel: usb 1-2: SerialNumber: ...........................8SI1c
Jan 23 13:30:51 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 23 13:30:51 kernel: scsi host0: usb-storage 1-2:1.0
Jan 23 13:30:52 kernel: usb 1-2: USB disconnect, device number 16
Jan 23 13:30:53 kernel: usb 1-2: new high-speed USB device number 17 using xhci-mtk
Jan 23 13:30:53 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 23 13:30:53 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 23 13:30:53 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 23 13:30:53 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 23 13:30:53 kernel: usb 1-2: SerialNumber: .............................PR1a
Jan 23 13:30:53 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 23 13:30:53 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.
[E] Jan 23 13:30:53 ndm: Cifs::ServerTsmb: tsmb-cfg: "Failed to connect to remote queue (port 7004): Connection refused".
[E] Jan 23 13:30:53 ndm: Cifs::ServerTsmb: failed to activate a printer instance.
[E] Jan 23 13:30:53 ndm: Printer::Manager: failed to activate "HP LaserJet Professional P1102" printer.
[W] Jan 23 13:30:53 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer activation error occurred, please try to reattach it.

Принтер не выключаеться, печатают не равномерно, т.е. промежутки печати могут быть долгими (может принтер уходит в сон или еще куда то), после

USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A

dev 17 - стабильно приходиться перегружать роутер.

Клиенты которые печатают подключены по LAN проводу, на всех стоит Win7/Win10.

 

Share this post


Link to post
Share on other sites
  • 0

а хоть когда-то это работало? Проблема в новом TSMB (в версии 3+) или всегда была?

Share this post


Link to post
Share on other sites
  • 0
13 минуты назад, Mikesk сказал:

а хоть когда-то это работало? Проблема в новом TSMB (в версии 3+) или всегда была?

Нет такая работа с самого начала, и проверялась только на TSMB.

Share this post


Link to post
Share on other sites
  • 0
6 минут назад, vasek00 сказал:

Нет такая работа с самого начала, и проверялась только на TSMB.

я бы начал с проверки старичка cifs. Есть у коллег прецеденты, когда на TSMB принтер не печатал, а на CIFS летает.

Share this post


Link to post
Share on other sites
  • 0
46 минут назад, Mikesk сказал:

я бы начал с проверки старичка cifs. Есть у коллег прецеденты, когда на TSMB принтер не печатал, а на CIFS летает.

  Тут все работает на TSMB, фишка в том что за указанный период с окт.19 по 01.20 тормоз после определенной процедуры

USB disconnect, device number ...

и если применить "танец с бубном" - ресет по расписанию то не кто не чего и не заметит, толь роутер будет дергать круглосуточных клиентов которые на wifi и на LAN на время его загрузки которое оказывается равно "system ready, core startup time is 28 seconds"

так же не понятен warning  статус usblp0 - думаю как раз уход в сон принтера (глубокий/не глубокий фиг его знает и есть ли он в данном случае)

[W] Jan 22 16:58:46 kernel: usblp0: nonzero read bulk status received: -71

и после 17 попытки он в off line

[E] Jan 23 13:30:53 ndm: Cifs::ServerTsmb: tsmb-cfg: "Failed to connect to remote queue (port 7004): Connection refused".
[E] Jan 23 13:30:53 ndm: Cifs::ServerTsmb: failed to activate a printer instance.
[E] Jan 23 13:30:53 ndm: Printer::Manager: failed to activate "HP LaserJet Professional P1102" printer.

Возврат как бы к релизу c CIFS прошивки не выход.

Share this post


Link to post
Share on other sites
  • 0
1 час назад, vasek00 сказал:

  Возврат как бы к релизу c CIFS прошивки не выход.

Это понятно, но вы могли бы помочь хоть с проблемной подсистемой определиться. Вряд ли такую ситуацию можно воспроизвести у разработчиков кинетика.

Share this post


Link to post
Share on other sites
  • 0
9 минут назад, Mikesk сказал:

Это понятно, но вы могли бы помочь хоть с проблемной подсистемой определиться. Вряд ли такую ситуацию можно воспроизвести у разработчиков кинетика.

Так написал что с 3.1.6 релиз, и все последующие обновления с него. Ранее в данном месте данного принтера подключенному роутеру не было нужды, а когда появилась то и релиз уже 3.х

Помочь только за, попробовать джампы, только вот поймать приближение dev 17 нужно будет.

Вот и сейчас в 18:12 в WEB нет принтера и в логе, ну правда и работников уже нет.

[W] Jan 23 17:00:17 kernel: usblp0: nonzero read bulk status received: -71
[I] Jan 23 17:00:17 kernel: usb 1-2: USB disconnect, device number 3
[I] Jan 23 17:00:17 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.

 

Share this post


Link to post
Share on other sites
  • 0
В 11.11.2019 в 10:52, vasek00 сказал:

12 день

Где-то я это уже видел :) Хотя не стоит все проблемы одной гребенкой стричь.. Но всё-таки, если точнее аптайм на момент возникновения проблемы посмотреть в имеющихся случаях (взять из self-test'ов из блока show system, если  снимался позже, то ориентироваться на логи и вычислять).

Share this post


Link to post
Share on other sites
  • 0

Что сделано - взял принтер "Samsung M2020" (он настроен на ожидание 20мин и выключение, т.е. последующая печать только через кнопку включения) в отличие от " HP LaserJet Professional P1102"

Проверка Samsung на роутере на 3.3.3 KN1010 (в отличие от другого 3.3.2 KN1010) подключение принтера к USB2 порту в обоих случаях.

Скрытый текст

https://www.support.hp.com/ru-ru/document/c02910948

Устройство автоматически переходит в спящий режим по прошествии короткого периода времени ожидания. Когда устройство находится в режиме автоматического отключения, все индикаторы на панели управления и индикатор кнопки питания выключены, но панель управления отвечает на команды и устройство печатает без задержки.

Функция автоматического выключения активирована по умолчанию, а стандартный интервал времени составляет пять минут. Измените параметры автоматического отключения, выбрав интервал времени в раскрывающемся меню Автоматическое отключение по прошествии: . Отключите автоматическое выключение, удалив флажок напротив параметра Автоматически выключать устройство при отсутствии активности.

Проверка Samsung M2020 включение и авто выкл. его через интревал 20мин, т.е. отключается на "глухо".

[I] Jan 24 11:04:45 kernel: usb 2-1: New USB device found, idVendor=1f75, idProduct=0621
[I] Jan 24 11:04:45 kernel: usb 2-1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[I] Jan 24 11:04:45 kernel: usb 2-1: SerialNumber: ..................
[I] Jan 24 11:04:45 kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
[I] Jan 24 11:04:45 kernel: scsi host0: usb-storage 2-1:1.0
[I] Jan 24 11:04:45 dropbear: Started version 2019.78-1

...

[W] Jan 24 11:32:07 kernel: usblp0: nonzero read bulk status received: -71
[I] Jan 24 11:32:07 kernel: usb 1-2: USB disconnect, device number 2
[I] Jan 24 11:32:07 kernel: usblp0: removed
[I] Jan 24 11:32:07 ndm: Printer::Manager: "Samsung M2020" printer detached.

в WEB как и положено выключен

Далее чтоб не ждать долго dev 17 делаю один раз просто отключение от 220 и потом включение

[I] Jan 24 12:06:34 kernel: usb 1-2: USB disconnect, device number 6
[W] Jan 24 12:06:34 kernel: usblp0: nonzero read bulk status received: -143
[I] Jan 24 12:06:34 kernel: usblp0: removed
[I] Jan 24 12:06:34 ndm: Printer::Manager: "Samsung M2020" printer detached.
...
[I] Jan 24 12:07:05 kernel: usb 1-2: new high-speed USB device number 7 using xhci-mtk
[I] Jan 24 12:07:05 kernel: usb 1-2: New USB device found, idVendor=04e8, idProduct=3321
[I] Jan 24 12:07:05 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Jan 24 12:07:05 kernel: usb 1-2: Product: M2020 Series
[I] Jan 24 12:07:05 kernel: usb 1-2: Manufacturer: Samsung Electronics Co., Ltd.
[I] Jan 24 12:07:05 kernel: usb 1-2: SerialNumber: ...............
[I] Jan 24 12:07:05 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321
[I] Jan 24 12:07:05 ndm: Printer::Manager: "Samsung M2020" printer attached.

Потом просто отключением USB кабеля и его включением обратно догоняю до dev 17

[W] Jan 24 12:10:11 kernel: usblp0: nonzero read bulk status received: -71
[I] Jan 24 12:10:11 kernel: usb 1-2: USB disconnect, device number 16
[I] Jan 24 12:10:11 kernel: usblp0: removed
[I] Jan 24 12:10:11 ndm: Printer::Manager: "Samsung M2020" printer detached.

[I] Jan 24 12:10:19 kernel: usb 1-2: new high-speed USB device number 17 using xhci-mtk
[I] Jan 24 12:10:19 kernel: usb 1-2: New USB device found, idVendor=04e8, idProduct=3321
[I] Jan 24 12:10:19 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Jan 24 12:10:19 kernel: usb 1-2: Product: M2020 Series
[I] Jan 24 12:10:19 kernel: usb 1-2: Manufacturer: Samsung Electronics Co., Ltd.
[I] Jan 24 12:10:19 kernel: usb 1-2: SerialNumber: .......
[I] Jan 24 12:10:19 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321
[I] Jan 24 12:10:19 ndm: Printer::Manager: "Samsung M2020" printer attached.
...
[W] Jan 24 12:11:13 kernel: usblp0: nonzero read bulk status received: -71
[I] Jan 24 12:11:13 kernel: usb 1-2: USB disconnect, device number 17
[I] Jan 24 12:11:13 kernel: usblp0: removed
[I] Jan 24 12:11:13 ndm: Printer::Manager: "Samsung M2020" printer detached.
...
[I] Jan 24 12:11:21 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321
[I] Jan 24 12:11:21 ndm: Printer::Manager: "Samsung M2020" printer attached.
...
[W] Jan 24 12:11:43 kernel: usblp0: nonzero read bulk status received: -71
[I] Jan 24 12:11:43 kernel: usb 1-2: USB disconnect, device number 18
[I] Jan 24 12:11:43 kernel: usblp0: removed
[I] Jan 24 12:11:43 ndm: Printer::Manager: "Samsung M2020" printer detached.
....
[I] Jan 24 12:11:49 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 19 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321
[I] Jan 24 12:11:49 ndm: Printer::Manager: "Samsung M2020" printer attached.
....
[W] Jan 24 12:12:05 kernel: usblp0: nonzero read bulk status received: -71
[I] Jan 24 12:12:05 kernel: usb 1-2: USB disconnect, device number 19
[I] Jan 24 12:12:05 kernel: usblp0: removed
[I] Jan 24 12:12:05 ndm: Printer::Manager: "Samsung M2020" printer detached.
....
[I] Jan 24 12:12:12 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 20 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321
[I] Jan 24 12:12:12 ndm: Printer::Manager: "Samsung M2020" printer attached.

Пробуем печать, все ОК

Далее выключаем его из сети 220 и опять включаю

[I] Jan 24 12:12:29 kernel: usb 1-2: USB disconnect, device number 20
[W] Jan 24 12:12:29 kernel: usblp0: nonzero read bulk status received: -143
[I] Jan 24 12:12:30 kernel: usblp0: removed
[I] Jan 24 12:12:30 ndm: Printer::Manager: "Samsung M2020" printer detached.
...
[I] Jan 24 12:12:35 kernel: usb 1-2: new high-speed USB device number 21 using xhci-mtk
[I] Jan 24 12:12:36 kernel: usb 1-2: New USB device found, idVendor=04e8, idProduct=3321
[I] Jan 24 12:12:36 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[I] Jan 24 12:12:36 kernel: usb 1-2: Product: M2020 Series
[I] Jan 24 12:12:36 kernel: usb 1-2: Manufacturer: Samsung Electronics Co., Ltd.
[I] Jan 24 12:12:36 kernel: usb 1-2: SerialNumber: ......
[I] Jan 24 12:12:36 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321
[I] Jan 24 12:12:36 ndm: Printer::Manager: "Samsung M2020" printer attached.

 

В отличие от принтера "HP LaserJet Professional P1102"

Jan 23 13:30:33 kernel: usblp0: removed
Jan 23 13:30:33 ndm: Cifs::ServerTsmb: tsmb-cfg: "Failed to connect to remote queue (port 7004): Connection refused".
Jan 23 13:30:33 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer detached.
Jan 23 13:30:50 kernel: usb 1-2: new high-speed USB device number 16 using xhci-mtk
Jan 23 13:30:51 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 23 13:30:51 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 23 13:30:51 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 23 13:30:51 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 23 13:30:51 kernel: usb 1-2: SerialNumber: ...........................8SI1c
Jan 23 13:30:51 kernel: usb-storage 1-2:1.0: USB Mass Storage device detected
Jan 23 13:30:51 kernel: scsi host0: usb-storage 1-2:1.0
Jan 23 13:30:52 kernel: usb 1-2: USB disconnect, device number 16
Jan 23 13:30:53 kernel: usb 1-2: new high-speed USB device number 17 using xhci-mtk
Jan 23 13:30:53 kernel: usb 1-2: New USB device found, idVendor=03f0, idProduct=002a
Jan 23 13:30:53 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 23 13:30:53 kernel: usb 1-2: Product: HP LaserJet Professional P1102
Jan 23 13:30:53 kernel: usb 1-2: Manufacturer: Hewlett-Packard
Jan 23 13:30:53 kernel: usb 1-2: SerialNumber: .............................PR1a
Jan 23 13:30:53 kernel: usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x03F0 pid 0x002A
Jan 23 13:30:53 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer attached.
Jan 23 13:30:53 ndm: Cifs::ServerTsmb: tsmb-cfg: "Failed to connect to remote queue (port 7004): Connection refused".
Jan 23 13:30:53 ndm: Cifs::ServerTsmb: failed to activate a printer instance.
Jan 23 13:30:53 ndm: Printer::Manager: failed to activate "HP LaserJet Professional P1102" printer.
Jan 23 13:30:53 ndm: Printer::Manager: "HP LaserJet Professional P1102" printer activation error occurred, please try to reattach it. 

 

Edited by vasek00

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...