shik Posted July 20, 2020 Share Posted July 20, 2020 Имеется 2 компьютера с сетевыми картами 1000Мб. Настройка сетевой карты компьютера 1: Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 1000baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off Supports Wake-on: g Wake-on: g Current message level: 0x000000ff (255) Настройка сетевой карты компьютера 2 приведена на рисунке 1. Порты роутера настроены 1000Мб Full duplex, при этом скорость не превышает 54 Мб (рисунок 2). Quote Link to comment Share on other sites More sharing options...
0 drugold Posted July 20, 2020 Share Posted July 20, 2020 (edited) Попробуйте выбрать на обоих ПК и Кинетике "Автосогласование". Edited July 20, 2020 by drugold Quote Link to comment Share on other sites More sharing options...
0 vasek00 Posted July 20, 2020 Share Posted July 20, 2020 (edited) (iperf3 -c .... -R -t 480)ПК(LAN)---(LAN)KN3010(LAN)---(LAN)KN1010(iperf3 -s) или (iperf3 -c .... -t 480)ПК(LAN)---(LAN)KN3010(LAN)---(LAN)KN1010(iperf3 -s) В итоге Скрытый текст / # iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.130.2, port 50375 [ 5] local 192.168.130.100 port 5201 connected to 192.168.130.2 port 50376 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.02 sec 94.8 MBytes 778 Mbits/sec 0 406 KBytes [ 5] 1.02-2.02 sec 95.0 MBytes 801 Mbits/sec 0 406 KBytes [ 5] 2.02-3.02 sec 93.4 MBytes 780 Mbits/sec 0 568 KBytes [ 5] 3.02-4.03 sec 81.2 MBytes 679 Mbits/sec 0 650 KBytes [ 5] 4.03-5.04 sec 92.5 MBytes 768 Mbits/sec 0 696 KBytes [ 5] 5.04-6.02 sec 87.5 MBytes 749 Mbits/sec 0 696 KBytes [ 5] 6.02-7.01 sec 97.5 MBytes 819 Mbits/sec 0 749 KBytes [ 5] 7.01-8.02 sec 98.8 MBytes 821 Mbits/sec 0 749 KBytes [ 5] 8.02-9.02 sec 95.0 MBytes 799 Mbits/sec 0 749 KBytes [ 5] 9.02-10.02 sec 91.2 MBytes 765 Mbits/sec 0 749 KBytes [ 5] 10.02-11.02 sec 96.9 MBytes 817 Mbits/sec 0 817 KBytes [ 5] 11.02-12.01 sec 95.0 MBytes 798 Mbits/sec 0 817 KBytes [ 5] 12.01-13.02 sec 95.0 MBytes 790 Mbits/sec 0 817 KBytes [ 5] 13.02-14.02 sec 95.0 MBytes 799 Mbits/sec 0 817 KBytes [ 5] 14.02-15.02 sec 97.5 MBytes 815 Mbits/sec 0 817 KBytes [ 5] 15.02-16.02 sec 93.8 MBytes 790 Mbits/sec 0 817 KBytes [ 5] 16.02-17.02 sec 96.2 MBytes 804 Mbits/sec 0 817 KBytes iperf3: error - unable to write to stream socket: Connection reset by peer ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- ^Ciperf3: interrupt - the server has terminated / # То же самое только передача Скрытый текст / # iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.130.2, port 50391 [ 5] local 192.168.130.100 port 5201 connected to 192.168.130.2 port 50392 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 78.2 MBytes 655 Mbits/sec [ 5] 1.00-2.00 sec 87.3 MBytes 732 Mbits/sec [ 5] 2.00-3.00 sec 98.9 MBytes 831 Mbits/sec [ 5] 3.00-4.00 sec 96.8 MBytes 811 Mbits/sec [ 5] 4.00-5.00 sec 88.2 MBytes 740 Mbits/sec [ 5] 5.00-6.00 sec 96.8 MBytes 812 Mbits/sec [ 5] 6.00-7.00 sec 86.9 MBytes 729 Mbits/sec [ 5] 7.00-8.00 sec 91.9 MBytes 772 Mbits/sec [ 5] 8.00-9.00 sec 86.7 MBytes 727 Mbits/sec [ 5] 9.00-10.00 sec 86.7 MBytes 727 Mbits/sec [ 5] 10.00-11.00 sec 95.8 MBytes 804 Mbits/sec [ 5] 11.00-12.00 sec 96.6 MBytes 810 Mbits/sec [ 5] 12.00-13.00 sec 95.5 MBytes 800 Mbits/sec [ 5] 13.00-14.00 sec 94.6 MBytes 794 Mbits/sec [ 5] 14.00-15.00 sec 86.9 MBytes 729 Mbits/sec [ 5] 15.00-16.00 sec 99.2 MBytes 833 Mbits/sec [ 5] 16.00-17.00 sec 87.4 MBytes 733 Mbits/sec [ 5] 17.00-18.00 sec 99.1 MBytes 832 Mbits/sec [ 5] 18.00-19.00 sec 93.0 MBytes 780 Mbits/sec [ 5] 19.00-20.00 sec 87.8 MBytes 737 Mbits/sec [ 5] 19.00-20.00 sec 87.8 MBytes 737 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-20.00 sec 1.82 GBytes 783 Mbits/sec receiver iperf3: the client has terminated ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- возможно драйвера на ПК Edited July 20, 2020 by vasek00 Quote Link to comment Share on other sites More sharing options...
0 shik Posted July 21, 2020 Author Share Posted July 21, 2020 Сделал порты 100МБ FullDuplex, скорость 11МБ. Драйвера на ПК обновил, автосогласование пробовал. Quote Link to comment Share on other sites More sharing options...
0 shik Posted July 21, 2020 Author Share Posted July 21, 2020 При этом скорость WAN Quote Link to comment Share on other sites More sharing options...
0 vk11 Posted July 21, 2020 Share Posted July 21, 2020 1 час назад, shik сказал: Сделал порты 100МБ FullDuplex, скорость 11МБ. Драйвера на ПК обновил, автосогласование пробовал. Ну так и что вы хотите от 100? Не 10-11 мегабайт, а 80-100 мегабайт? Извините, но вам уже сказали - поставьте везде "авто". С Риалтеком и Кинетиками на гигабите проблем нет (не встречал ). Только если кабели/пачкорды у вас фуфел. Quote Link to comment Share on other sites More sharing options...
0 shik Posted July 21, 2020 Author Share Posted July 21, 2020 Я поставил 100МБ ради эксперимента, останется ли скорость такой же, как и на 1000МБ, вдруг проблема с автосогласованием на скорости 1000МБ. Попробую заменить патч-корды. Quote Link to comment Share on other sites More sharing options...
Question
shik
Имеется 2 компьютера с сетевыми картами 1000Мб.
Настройка сетевой карты компьютера 1:
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
Настройка сетевой карты компьютера 2 приведена на рисунке 1.
Порты роутера настроены 1000Мб Full duplex, при этом скорость не превышает 54 Мб (рисунок 2).
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.